So much for new update

[DigDog]

Followed directions exactly like on updater get to “update” and then plug in and keep getting sent back to original screen. Using Mac with chrome
Any ideas?

 

[DigDog]

Followed directions exactly like on updater get to “update” and then plug in and keep getting sent back to original screen. Using Mac with chrome
Any ideas? screen is farthest i get then goes back to next screen

Followed directions exactly like on updater get to “update” and then plug in and keep getting sent back to original screen. Using Mac with chrome
Any ideas?

First screen is the furthest i get then back to Home Screen with v71
It appears its not recognized in any usb ports. Not getting any message about it but just not responding like its not even there. Tried two different cables, it charges when plugged in just not responding to the update. What am I missing

 

[The Coin Magician]

Followed directions exactly like on updater get to “update” and then plug in and keep getting sent back to original screen. Using Mac with chrome
Any ideas?

All i have been doing now for the most part of this year is updating software on legend and now messing around Doing much the same with D2. Totally pissed of with the whole thing.

 

[DigDog]

Problem is when you get to this stage.
What should be the next step from here

 

[DigDog]

All i have been doing now for the most part of this year is updating software on legend and now messing around Doing much the same with D2. Totally pissed of with the whole thing.

Yep me too this is getting ridiculous
Why not just use the same platform that everyone used on previous updates that worked just fine
Now people have to keep changing things on their computers too?

 

[DigDog]

Thing is when you get to this step the updater does not give you directions anymore like in the previous steps
Better clarification is needed
Tried every combination only thing I haven’t done was a computer reboot after installing chrome. Don’t have time to mess with it anymore right now
If anyone has any ideas much appreciated thanks

 

[The Coin Magician]

Yep me too this is getting ridiculous
Why not just use the same platform that everyone used on previous updates that worked just fine
Now people have to keep changing things on their computers too?

Maybe one day some Alien with Super High Intelligence might just make us something called a decent truly advanced metal detector. Seriously i dig no deeper with any software version known to man.
I will say it again VLF needs a replacement. It's like a dog chasing it's tail , it's really going no where. Maxxed out and these days failing to find the truly deeper treasures . I am quitting buying any more detectors , until something better than
VLF comes. The only problem there is i will be dead and gone by then.

 

[bday]

I didn't have an issue with either the remote or the WS6. I turned the remote on, Did Option > Config > Update > Confirm. Plugged the USB to my computer. Went to XP's page, then scrolled to the bottom of the update page and pressed update now.
It updated the remote. I then did the same thing on the WS6 and it updated that as well. I'm in the progress of adding my custom programs back in. Seems to work just fine at the moment. I used a MacBook Pro and Chrome.

 

[Mudwhale]

FWI, make sure your usb port is colored blue or teal. Blue = 3.0 and teal = 3.1. XP software is geared for the fast usb ports. If the port is not fast enough it will puke.

 

[Diggin' B]

I had the same issues. It charges but that's it. I tried on my home computer and at work. It must be what Mudwhale just mentioned. I will mess with it again later.

 

[Jed in NC]

I updated on my MacBook with no issues. I was using Brave browser and not Chrome. Ditto Mudwhale's reply. Also make sure you're not using a cheap USB cable. Have seen issues with my Garmin devices in the past where they would charge but not pass data when using a cheap cable. This is the cable I used to update the WS6. https://www.amazon.com/gp/product/B00NH13S44/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 My ports are USB 3.0 but the cable is USB 2.0

 

[DigDog]

Didn’t see any buttons for “update now” maybe the problem?
Will look later when I can
Thanks for all the help guys

 

[DigDog]

Using the xp cables

 

[IDXMonster]

Do you guys have accounts with XP?

 

[DigDog]

Do you guys have accounts with XP?

I thought it was a requirement for updating to 1.0

 

[Ytcoinshooter]

Followed directions exactly like on updater get to “update” and then plug in and keep getting sent back to original screen. Using Mac with chrome
Any ideas?

Problem is when you get to this stage.
What should be the next step from here

I think that’s where I plugged in the remote.
I successfully used a 2012 1/2 MacBook and chrome browser to update the Deus 2 remote, WS6 and WSA2XL. The remote took one try. For the last two devices I did have to do it a couple times because the sequence, when to plug in the device via usb makes it recognizable on the update box. Goofing the sequence and the headphones & WS6 won’t appear. A couple times there was nothing in the update box. There is a screen prompt during install sequence for version 1. showing when to plug it in. I’m a retired I.T. analyst so I have patience for this and always figure if it doesn’t work I am likely the problem.

 

[DigDog]

I think that’s where I plugged in the remote.
I successfully used a 2012 1/2 MacBook and chrome browser to update the Deus 2 remote, WS6 and WSA2XL. The remote took one try. For the last two devices I did have to do it a couple times because the sequence, when to plug in the device via usb makes it recognizable on the update box. Goofing the sequence and the headphones & WS6 won’t appear. A couple times there was nothing in the update box. There is a screen prompt during install sequence for version 1. showing when to plug it in. I’m a retired I.T. analyst so I have patience for this and always figure if it doesn’t work I am likely the problem.

When i plug it in during the install direction sequence nothing and when i unplug it takes the remote back to the beginning and start all over
Where i get stuck is at the screen in the end that i posted where it says “update “ with the arrow on bottom right
After that whatever i do goes back to the beginning
Haven’t tried to update anything else yet trying the remote first

 

[Jed in NC]

Based on the screenshot you posted before. Once you get to this screen you should be in Update mode on your remote.

Click the ">" button and you get this screen prompting you to plugin USB cable to PC. Click ">"

Then you will get a pop-up screen that looks like this. Select "XP Deus2" and click on "Connect" button.

That will give you this screen. Choose "V1.1(Deus II)" and Click the "Update" button on right of screen.

You will see the current version being erased and the new version being programmed.

Followed by a "Success" message. Unplug USB and the remote will reboot.

 

[Ytcoinshooter]

I think that’s where I plugged in the remote.
I successfully used a 2012 1/2 MacBook and chrome browser to update the Deus 2 remote, WS6 and WSA2XL. The remote took one try. For the last two devices I did have to do it a couple times because the sequence, when to plug in the device via usb makes it recognizable on the update box. Goofing the sequence and the headphones & WS6 won’t appear. A couple times there was nothing in the update box. There is a screen prompt during install sequence for version 1. showing when to plug it in. I’m a retired I.T. analyst so I have patience for this and always figure if it doesn’t work I am likely the problem.

Now I just noticed the post about 1.1 patch. I’m going to look at the link. I haven’t hunted much more than a couple hours since updating Sunday.. This company is that responsive?

 

[DigDog]

Ok i will look again later when i can thank you