Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

xp deus 2 update ?

Version 2 is the latest release I believe as of last August.


To update your XP Deus 2 metal detector, follow these steps based on the official process provided by XP Metal Detectors. Ensure you have a stable internet connection, a compatible computer (PC or Mac), and the correct cables before starting.
  1. Prepare Your Equipment:
    • Charge your Deus 2 remote control, wireless headphones (WS6, WSAII, or WSAII XL), and coil to at least 50% battery to avoid interruptions during the update.
    • Gather the necessary cables: the 3-output USB cable (for the remote control and coil) and the single USB cable (for the headphones), both supplied with your Deus 2.
  2. Download the Updater:
    • Visit the XP Metal Detectors website (xpmetaldetectors.com) and navigate to the “Updates” section.
    • Download the latest version of the Deus 2 updater software. This platform is compatible with PC and Mac but works only with specific browsers: Chrome, Edge, Opera, or Brave.
  3. Install and Launch the Updater:
    • Install the updater software on your computer by following the on-screen instructions.
    • Launch the application once installed. Do not connect any devices yet—wait for the software to prompt you.
  4. Update the Remote Control:
    • Open the updater and select the “DEUS II” tab.
    • Choose the desired version (e.g., V2.0, the latest as of August 2024) from the drop-down menu.
    • Set your remote control to update mode: Go to Option > Config > Update > Confirm on the remote’s menu.
    • Connect the remote control to your computer using the 3-output USB cable when prompted by the updater.
    • Follow the on-screen instructions to complete the update. Do not disconnect until the process finishes.
  5. Update the Headphones (WS6, WSAII, or WSAII XL):
    • Switch to the “WS6 or WSAII” tab in the updater (WSAII and WSAII XL use the same file).
    • Set your headphones to update mode:
      • For WS6: Press the ⚙️ button, scroll to CONFIG, press for 2 seconds, scroll to UPDATE, press for 3 seconds, then press the bottom right button to confirm.
      • For WSAII/WSAII XL: Press the “-” button, then the “+” button, and hold both for 12 seconds.
    • Connect the headphones to your computer using the single USB cable when prompted.
    • Follow the instructions to update. Ensure the headphone version matches the remote control version for compatibility.
  6. Verify the Update:
    • After updating, check the version on your remote control (under Option > Info) and headphones to confirm they match.
    • Test your detector to ensure all components (remote, headphones, and coil) work together seamlessly.
Important Notes:
  • Always use the correct cables as specified (3-output for remote, single for headphones).
  • If you’ve created custom programs, note them down beforehand, as updates may reset settings.
  • For the latest features, such as compatibility with the XTREM HUNTER accessory (introduced in V2.0), ensure you update to the most recent version available.
For detailed instructions or troubleshooting, refer to the XP Metal Detectors website under the Deus 2 update section. As of April 3, 2025, the process remains consistent with these steps, though always check for any new announcements or versions released after August 2024.
 
Top