Wireless Etrac recommendations?

[HighPlainsHunter]

The transmitter works but when you pair 2 of them together and plug ear buds into the receiver you only hear thru one speaker. That would not of been me. The only thing I do on Facebook is buy things local.
They are very quick and transmit very clear sound but not good for what I wanted.
My next go at this will be something made for detectors that I know will work.

I couldn't remember who I got this from, but it works on the Vanquish 540 with a pair of wired earbuds, and my Koss QZ99 headphones. Sound from both ears. I'm wondering if the transmitter you have would work with this receiver?

Amazon.com: TaoTronics Bluetooth AUX Adapter, AptX Low Latency Bluetooth Receiver, 15 Hour Hands-Free Bluetooth Car kit, Wireless Audio Bluetooth 4.2 Car Adapter, Auto on Once Plugged to Power(CVC 6.0)

Amazon.com: TaoTronics Bluetooth AUX Adapter, AptX Low Latency Bluetooth Receiver, 15 Hour Hands-Free Bluetooth Car kit, Wireless Audio Bluetooth 4.2 Car Adapter, Auto on Once Plugged to Power(CVC 6.0)

smile.amazon.com

 

[Tony-Ok]

What bought didn't work. I bought 2 of the low latency units that can receive or transmit. I paired them no problem and they work but I only get 1 channel thru my headphones. Only 1 speaker works.
I am back to being wired.
I haven't bothered with it lately because I have been working on chest mounting my Explorer. Today I have it ready waiting for my 3' extension cable that's due on Saturday. I don't mind using wired when it's hooked into a chest mount.
The 13" Ultimate coil feels light on a Teknetics S rod.

Hey Jeff , you probably need a mono to stereo jack..........that should fix your problem.

 

[Tony-Ok]

For my CZ & FBS detectors
Quest wirefree headphones & transmitter at Kellyco 150.00 i think
These are the big headphones comfortable great volume.
Tried Garrett Z-lynk they had no volume.

Mono to stereo Jack is what I use for my CZto work

 

[Jeff in Pa]

Thanks Tony, I will give it a try.

Mono to stereo Jack is what I use for my CZto work

 

[Tony-Ok]

For my CZ & FBS detectors
Quest wirefree headphones & transmitter at Kellyco 150.00 i think
These are the big headphones comfortable great volume.
Tried Garrett Z-lynk they had no volume.

Hey u2robert , the ZLink work perfectly with a mono to stereo jack on the CZs . Inexpensive fix !

 

[u2robert]

Hey u2robert , the ZLink work perfectly with a mono to stereo jack on the CZs . Inexpensive fix !

Is it nice and loud using the stereo jack?

 

[Tony-Ok]

Is it nice and loud using the stereo jack?

No jack is barely audible...... with the mono to stereo jack , it is very loud ...... you will have to adjust them down...... my z Links are perfect for the CZ that way !!

 

[HighPlainsHunter]

I couldn't remember who I got this from, but it works on the Vanquish 540 with a pair of wired earbuds, and my Koss QZ99 headphones. Sound from both ears. I'm wondering if the transmitter you have would work with this receiver?

Amazon.com: TaoTronics Bluetooth AUX Adapter, AptX Low Latency Bluetooth Receiver, 15 Hour Hands-Free Bluetooth Car kit, Wireless Audio Bluetooth 4.2 Car Adapter, Auto on Once Plugged to Power(CVC 6.0)

Amazon.com: TaoTronics Bluetooth AUX Adapter, AptX Low Latency Bluetooth Receiver, 15 Hour Hands-Free Bluetooth Car kit, Wireless Audio Bluetooth 4.2 Car Adapter, Auto on Once Plugged to Power(CVC 6.0)

smile.amazon.com

View attachment 2184

Ok, I went ahead and ordered the TaoTronics Portable Bluetooth Transmitter to go along with the TaoTronics-Bluetooth-Receiver that I already had for using wired headphones/earbuds, wirelessly with my 540 Pro Pack. I wanted a solution for the Etrac, and I just tested these with it, and they worked perfectly. Because the transmitter and the receiver are Aptx Low Latency, there was no lag when testing the Etrac on a coin. Tried both with, and without, the Tx/Rx, and the response was identical. Sound from both ears on my earbuds, and wired headphones.

Here's the links for what I used. I don't guaranty these will work for you. Besides the transmitter and receiver, you will need a 3.5mm/1/8" to 1/4" stereo adapter that is used to connect the transmitter to the Etrac. All connections are stereo.

Transmitter:

https://smile.amazon.com/gp/product/B07W5S2WVN/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Receiver:

https://smile.amazon.com/gp/product/B07BLQ47MY/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1