What detector does this NEL Hunter coil fit

[Tommy Boy]

Hi Folks,
I got a NEL Hunter coil that I received in a package deal, and I am trying to find out what detector it goes on.

The coil was supposed to be for a Makro Multi Kruzer, but the pin holes don't match the connection.

The pin holes match the Racer 2, but nothing happens when I turn the Racer 2 on.

I have sent emails and pictures to Nokta Makro, but have not received a response

Any help will be appreciated, I am attaching pictures, any help would be appreciated

 

[JCR TX]

You might try E Mailing Nell an enquiry with the coil model/size and serial #. The connector looks like Whites or Fisher or earlier Garrett. I would have to count pins on mine to guess better.

 

[Tommy Boy]

Correction, I have sent emails to NEL coils, for assistance , instead of Nokta Makro.

Multi tasking and old age can be a struggle.

 

[choppadude]

Possibly a AKA Sorex or Sigmun?

 

[Odanscoils]

Hi Folks,
I got a NEL Hunter coil that I received in a package deal, and I am trying to find out what detector it goes on.

The coil was supposed to be for a Makro Multi Kruzer, but the pin holes don't match the connection.

The pin holes match the Racer 2, but nothing happens when I turn the Racer 2 on.

I have sent emails and pictures to Nokta Makro, but have not received a response

Any help will be appreciated, I am attaching pictures, any help would be appreciated

I have the Hunter on my Explorer xs.
Looks like the same plug to me.

 

[Tommy Boy]

I hope to find out, it's a new coil, I hate to see not getting used. I have large coils, but my favorite size is the 7". The 7" on my Multi Kruzer is just as deep as the stock coil, but much better separation.

 

[Tommy Boy]

Update, I have been communicating with NEL and they told me based on the pictures and measurements, the coil was for a Fisher or Tecknetics detector, so now I just need to narrow it down to which one, any guesses

 

[BigTony]

Update, I have been communicating with NEL and they told me based on the pictures and measurements, the coil was for a Fisher or Tecknetics detector, so now I just need to narrow it down to which one, any guesses

Did you contact the seller of the package deal? They might know which detector goes with the NEL.

 

[Tommy Boy]

Yes, the original seller bought it, because it was advertised as belonging to the Makro Multi Kruzer, but the plug is different.

 

[trojdor]

Might fit a T2?
My wife has that coil on her Teknetics T2 and she loves it.

 

[Tommy Boy]

I posted a picture of the connector, do the connectors look the same

 

[OregonGregg]

That looks like the earlier plug style of the Nokta/Makro machines before they started waterproofing everything ( plugs are different) If that coil is for a Nokta/Makro and doesn't work on the Racers then it prob is a Fors Core or maybe Relic coil.

 

[Tommy Boy]

I tried it on the Racer 2, it screwed on, but didn't do anything when I turned it on.

I received an email from NEL, stating it was for Fisher, Teknetics. I sent NEL another email asking which model.

I wish there was someone in NW Arkansas, that had some Fisher- Teknetics machines, so I could test them.

 

[jim tn]

I used a Hunter NEl when I had a F 75. Looks the same to me! HH jim tn

 

[Wild Willy]

Good luck! If it has a serial no. then the mfg. should be able to tell you. I've had a few that had absolutely nothing on them.

 

[Gord (Tecumseh)]

It definitely fits the Fisher f75. I have used it on the 75 for about 7 or 8 years. It's solidly built but weighs more than the stock coil. It also seems to go a little deeper and to me it gives good target separation for such a big oil. A very good coil.

 

[Gord (Tecumseh)]

It should also fit the Teknetics detector that is almost the twin of the f75