Spectra V3 MixMode Stereo

[Manuellar]

Hi, for those using the V3 and want MixMode in stereo:
Audio-Target Volume-Balance = -100
Audio-Audio Threshold-Balance = +100
Target Volume in the right channel sound. Audio Threshold and All Metal on the left channel sound.
This is the combination of tones that I use:
Audio-Tone-Tone ID Mode-Custom-Edit:
-95 To -95
254 254
-94 To -41
0 0
-40 To -11
120 120
-10 To -1
130 130
0 to +4
140 140
+5 To +12
135 135
+13 To +18
140 140
+19 To +23
145 145
+24 To +34
150 150
+35 To +44
155 155
+45 To +54
160 160
+55 To +57
165 165
+58 To +66
170 170
+67 To +75
185 185
+76 To +80
195 195
+81 To +86
220 220
+87 To +90
225 225
+91 To +94
230 230
+95 To +95
250 250
You can enhance (or highlight) the tone of the preferred object. To me, this combination, it's going very well.
Regards

 

[Neil in West Jersey]

n/t

 

[nw1886]

Getting programed in as of right now! Thank you!

 

[Manuellar]

SI. I had heard that the MixMode in stereo is offered on the V3i.

 

[ak_1234]

You can still run that way on the V3i as they are different. Here's where...

V3, you can only hear all metal OR discrimination, not both at the same time. What you get is all metal in one ear and the other ear no audio when there is no target. When there is a target, the other ear gets to hear the discrimination audio, but the first ear hears no audio. When going to pinpoint, only one ear will get the audio (the one with the all metal channel set up in the balance).

V3i, all metal is on all the time in one ear, and discrimination audio is on all the time in the other ear. There is no cutting in or out per ear. And pinpoint will have audio in both ears. It does give more info this way.

 

[Manuellar]

You can still run that way on the V3i as they are different. Here's where...

V3, you can only hear all metal OR discrimination, not both at the same time. What you get is all metal in one ear and the other ear no audio when there is no target. When there is a target, the other ear gets to hear the discrimination audio, but the first ear hears no audio. When going to pinpoint, only one ear will get the audio (the one with the all metal channel set up in the balance).
V3i, all metal is on all the time in one ear, and discrimination audio is on all the time in the other ear. There is no cutting in or out per ear. And pinpoint will have audio in both ears. It does give more info this way.

Ok... I have not updated V3i, but I do not think big difference between the two forms of stereo.
Anyway, just explain how in the V3, for lovers of MixMode. Then everyone decides what she likes most.
Regards