nokta pinpointer with simplex

[bigdawg47]

thinking of buying the nokta pinpointer, any issues using it with the simplex thanks

 

[bigdawg47]

n/t

 

[Nokta Detectors]

We recommend the PulseDive as the Nokta Pointer works on the same frequency of the Simplex+.

 

[Johnnyanglo]

The Simplex and Nokta Pinpointer are incompatible.

If the pinpointer is within ten feet of the detector both begin to erratically motorboat. The frequency shift on the Simplex will not resolve the problem.

Any pinpointer hovering about 12 kHz will do the same.

 

[Monte]

thinking of buying the nokta pinpointer, any issues using it with the simplex thanks

My Nokta Pinpointer was stolen two years ago, but it works similar to my Makro pointer and shares the same operating frequency. I have been using my Makro Pinpointer for 5 years now, and no problems. I just bought the new Pulse-Dime Pinpointer a couple of months ago, and so far, neither of them have caused me any issues with the Simplex+ Both of my Pinpointers work just fine, but I have been favoring the new Pulse-Dive Pinpointer when using the Simplex+.

Monte

 

[cedarswamp]

My Nokta Pinpointer was stolen two years ago, but it works similar to my Makro pointer and shares the same operating frequency. I have been using my Makro Pinpointer for 5 years now, and no problems. I just bought the new Pulse-Dime Pinpointer a couple of months ago, and so far, neither of them have caused me any issues with the Simplex+ Both of my Pinpointers work just fine, but I have been favoring the new Pulse-Dive Pinpointer when using the Simplex+.

Monte
Might have to break down and buy one have you tried to pair it to your headphones,,,,,? CEDAR

 

[Monte]

cedarswamp:
Might have to break down and buy one have you tried to pair it to your headphones,,,,,? CEDAR

No, I haven't. My headphones are with the Anfibio Multi which a friend is using in Texas during our wintry weather. Besides, with my impaired hearing I prefer to use my corded headphones. Come summer I'll likely use the wireless with the Simplex+, but a lot of where I'm hunting now I just rely on the built-in speaker because there's no one around.

Monte

 

[u2robert]

Another good thing about the Simplex is the volume.
With my Accu Sound headphones by Detectorpro the volume will blast your ears off if your not careful.

 

[cedarswamp]

cedarswamp:
Might have to break down and buy one have you tried to pair it to your headphones,,,,,? CEDAR

No, I haven't. My headphones are with the Anfibio Multi which a friend is using in Texas during our wintry weather. Besides, with my impaired hearing I prefer to use my corded headphones. Come summer I'll likely use the wireless with the Simplex+, but a lot of where I'm hunting now I just rely on the built-in speaker because there's no one around.

Monte

Just received my simplex plus and noticed it has only three freq, and F1 seem to quiet down with the garrett pinpointer activated not totaly siient but bearable maybee down the road an update will take care of the problem,,,,CEDAR

 

[Monte]

cedarswamp:
Just received my simplex plus and noticed it has only three freq, and F1 seem to quiet down with the garrett pinpointer activated not totaly siient but bearable maybee down the road an update will take care of the problem,,,,CEDAR
I acquired those few Pinpointers to evaluate, and had issues with some. They were resolved by setting my Simplex+ down on my opposite side from using the Pinpointer. Better yet, I don't have any EMI issues with my Makro Pointer I've been using for over 5 years now, nor with the new Pulse-Dive Pinpointer I bought a few months ago. Personally, I hope they don't do any 'updates' unless absolutely necessary. Not all PPers cause EMI, and it's simple just to position the detector a little farther from the hand-held Pinpointer.

Just my experiences.

Monte

 

[JBM1]

I will be trying to match the Simplex with the same manufacturers pin pointer next week.
I will be disappointed if they cant work near each other.

 

[James/Washington]

I will be trying to match the Simplex with the same manufacturers pin pointer next week.
I will be disappointed if they cant work near each other.

Just be sure to get the PulseDive. It works beautifully with the Simplex+. The older Nokta Pinpointer, according to other posters, causes interference with the Simplex+. The PulseDive has 40 levels of frequency shift and IF it causes noise with the Simplex+, the frequency can be shifted to quieten the Simplex+. I had to shift mine as it was causing lots of interference, but after doing the frequency shift, it was as quiet as a mouse. .

 

[JBM1]

I have acquired a Nokta pin pointer and its very good when using the Simplex Frequencies s 1 & 3.

Happy Hunting Jerry.

 

[Monte]

As I have mentioned in different posts regarding the Simplex + and Pinpointers, I have sold off, or am still selling off, othr Pinpointers I bought for some evaluation work on EMI. The two Pinpointers I use are my Makro Pointer I have had since Jan. 8th of 2015, and 5 years later if works great, never have had a problem with it, and there's no EMI issues with my Simplex or other devices. The newest and perhaps favorite of all the Pinpointers I've owned and used is the Pulse-Rive Pinpointer. Works great and, again, no EMI issues.

I haven't changed the Frequency Shift on my Simplex+ and haven't changed anything on the Pulse-Dive Pinpointer. Just my personal experiences so far.

Monte