No depth in pinpoint mode with version .71

[RichW]

I'm getting about 3 Inches max. Anyone else experience this ? Loss of depth. is only happening when I use pinpoint.

 

[PhDtector]

I noticed that too. No idea what's going on.

 

[Tbone1]

Seems like less depth to me as well but updated to .71 pretty soon after I bought the Deaus 2 which has been less than 2 months ago.
Anyone compared it with the one?
I should do that

 

[Lt4ever]

I used the D1 on my test garden and it hit on all coins 6 to 12" deep in pinpoint mode

 

[Tbone1]

I misunderstood. I was thinking the op was talking about the MI -6 pinpointer. My error
I don’t always use the pinpoint mode just because that 9 inch coil does such a great job of locating in search mode.

 

[RichW]

I misunderstood. I was thinking the op was talking about the MI -6 pinpointer. My error
I don’t always use the pinpoint mode just because that 9 inch coil does such a great job of locating in search mode.

You would probably use it more if you hunted in the surf

 

[Tbone1]

So this morning I went out to a small park and really paid attention to how the pinpoint mode was doing. As I stated earlier the 9 inch coil does so well in search mode pinpointing the target that I don’t always use the pinpoint mode.
Anyway this morning I used it on every target and seems to be working fine for me. Couple dimes at 7-8 inches it pinpointed just fine.
I do have the .71 update.

 

[Coin Rescue Inc]

I rarely use Pinpointing with my 11 coil on the D2
just swinging over the target gets me real close.
I air tested the pinpoint on a picnic table yesterday just to see.
Using a quarter, a nickel, pure copper cent and a clad dime I got up to 8"
Depending how mineralized your soil is you can discount these numbers accordingly.
If you are only getting 3" check the mineralization of your soil as opposed to targets in clean beach sand.
That is a test you can easily perform

 

[targits]

sticking with 06 on the ws6 as its plenty deep on deepHC coins