New coil won't connect?

[Mark kus]

So I was on the first version with my D2 and got a 9" coil added it to controller and it won't connect? so I just updated the Ws6 and controller to version 7
and I can't check it until I get home but has anyone else had this problem?
I'm hoping the update will fix the issue. Thanlks
Mark

 

[Mark kus]

I linked the headphones to controller after the update will try to add coil again see what happens

 

[IDXMonster]

You’ve got the coil number entered correctly Mark? Make sure any “zero” is a zero and not the letter “O”…just scroll in the Pairing screen to where the new coil is highlighted and let it sit, it should pair by itself. Make sure your headphones are not on and it’s not pairing to that somehow…

 

[jayhop]

I recently got a new coil and headphones. I did have trouble pairing both. I tried several times and finally got them both paired.
I eventually made sure everything was off, then back on and tried again.
And if you aren't using your headphones you need to make sure your external speaker is on so you will know if it pairs.
It's really simple, but it can be made complicated, which I did.

 

[Mark kus]

Tried it all and I get this and press the center top button and it switches back to the serial number screen where I had actually deleted the original coil still stumped lol if it says valid it should be correct?
Mark

 

[Jed in NC]

I had issues pairing my replacement 11" coil. I would have sworn the number was entered correctly, but after using the magnify feature on my phone, had mistaken a "6" with an "8". The font on the coils is so hard to read. Much easier on the new 13 x 11.

 

[Mark kus]

I finally got it it one number in the serial was a zero so hard to tell

 

[IDXMonster]

Awesome Mark! Let us know what you think of that 9” coil when you get out.

 

[Ray(Ca)]

Yea I had the same problem. It was a B not a 8.
LOL!
Ray

 

[Mark kus]

I did the carbon shaft on my D2 came out great .

 

[Mark kus]

The lower

 

[Steve O]

You don't have to delete any coils unless you're not ever using them anymore. I left the 9" and the 13" on there and pair up the one I'm using that day. leave them on the coil list.

 

[Mark kus]

You don't have to delete any coils unless you're not ever using them anymore. I left the 9" and the 13" on there and pair up the one I'm using that day. leave them on the coil list.

Yeah I know that from the Deus1 owning the serial numbers are very hard to see unless you use phone lol. worked fine yesterday
Mark

 

[DigDog]

The serial numbers on the coil are very tricky. I swore the B was an 8 lol.
Apparently others have had the same problem B and 8 look identical and im sure other letters and numbers are confusing as well