Monte

[ohio fred]

Monte Will any old whites coils work on mx7 .Like the IDX ,XLT or MXT coils ?Thanks for reply.

 

[TC-NM]

I'm not Monte but, to answer your question... The short answer is NO to these coils: IDX and the XLT run at 6.592 kHz.

YES to these: MXT runs at 13.9 kHz. as well as your MX7.

TC-NM

 

[ohio fred]

I'm not Monte but, to answer your question... The short answer is NO to these coils: IDX and the XLT run at 6.592 kHz.

YES to these: MXT runs at 13.9 kHz. as well as your MX7.

TC-NM

Thanks

 

[vito]

I'm not Monte but, to answer your question... The short answer is NO to these coils: IDX and the XLT run at 6.592 kHz.

YES to these: MXT runs at 13.9 kHz. as well as your MX7.

TC-NM

Hello Fred, hello TC. I'm sorry to disagree, but if I remember correctly the MX-Sport and the MX7 are using the same coils, and both detectors will have different coil plugs compared to the eclipse series (V3(i),VX3, DFX,MXT,MX5).

 

[TC-NM]

Well I was only looking at the operating frequncy's as Ohio Fred had asked in his question (13.9). I did once own a MX Sport and I forgot about the pin configuration is different. Sorry about that Fred. Good catch Vito ...maybe I better let Monte answer these questions.

 

[#1Leatherneck]

Allow me to thank all of you on here! Those White's owners are left mostly to this forum to obtain knowledge, and assistance
in receiving assistance in their White's Metal Detector.
I feel that I would be remiss if I did not acknowledge as member(s) we are very dependent on each member.
Thanks!
Semper fi
Leatherneck

 

[vito]

Allow me to thank all of you on here! Those White's owners are left mostly to this forum to obtain knowledge, and assistance
in receiving assistance in their White's Metal Detector.
I feel that I would be remiss if I did not acknowledge as member(s) we are very dependent on each member.
Thanks!
Semper fi
Leatherneck

That is what I think a forum is for: Members help members. And we all aren't infallible at all, we're all doing our best. That's it.
So yes, thanks everyone.

 

[ohio fred]

Thanks for reply,s after taking coils and checking pin configuration you can not use then.

 

[TC-NM]

Good luck Ohio fred in finding the right coil.

TC-NM

 

[vito]

Hello Fred. Centreville Electronics has some in stock. --> centrevilleelectronics.net