Hi folks ive been in this section for awhile now reading mostly. I allways wanted a v3 but could never afford one until just recently. I found a deal that i couldnt say no to but still had to sell the machine i was using to help finace it lol. Its an non uograded v3 and i hope to send it away at the end of the season for the i upgrade.
well today i had a couple hours to spare after supper and i thought id head out and see what the v3 and i could find. I set up the machine to basically disc the ground , 5 tone for iron 0 to 50 a "0" tone rx11 and disc at 90. With the 10 band filter ( it seemed to provide a little less falsing) and recovey delay at 60 as i was hunting a real trashy area. Most of the hunt i didnt find much, i was basically just getting used to the machine and its sounds and behavior etc . I dug a few target that the v was telling me was trash just to see and sure enough, then found a 45' penny . My hunting parter was wanting a switch of senery so we headed off to a site that is an old school no longer in use. We had a club hunt there and 30 machines were all over the area in front of the school for about 3 hrs. After that hunt i returned to that site several times and pulled more goodies out . Well today was no exception.
Thru the iron clicks i got a choopy high tone id in the high 70's, it pp green at 5.5 in. I dug a plug and at 6 in pops out a 32' canadian nickle( im in canada btw). Love it those nickles some of my favortie coins to find. Next target was another crap sounding target that i actually had my buddy with his 3030 come to verify and he agreed it was worth digging so he pp for me .Dug the plug and couldnt find anything hmm. Flipped the plug and pp myself ,it was off to the side of the hole. I widened to hole and low and behold silver, a 38 dime, what a way to start with a brand new machine love it .
Cheers and HH
well today i had a couple hours to spare after supper and i thought id head out and see what the v3 and i could find. I set up the machine to basically disc the ground , 5 tone for iron 0 to 50 a "0" tone rx11 and disc at 90. With the 10 band filter ( it seemed to provide a little less falsing) and recovey delay at 60 as i was hunting a real trashy area. Most of the hunt i didnt find much, i was basically just getting used to the machine and its sounds and behavior etc . I dug a few target that the v was telling me was trash just to see and sure enough, then found a 45' penny . My hunting parter was wanting a switch of senery so we headed off to a site that is an old school no longer in use. We had a club hunt there and 30 machines were all over the area in front of the school for about 3 hrs. After that hunt i returned to that site several times and pulled more goodies out . Well today was no exception.
Thru the iron clicks i got a choopy high tone id in the high 70's, it pp green at 5.5 in. I dug a plug and at 6 in pops out a 32' canadian nickle( im in canada btw). Love it those nickles some of my favortie coins to find. Next target was another crap sounding target that i actually had my buddy with his 3030 come to verify and he agreed it was worth digging so he pp for me .Dug the plug and couldnt find anything hmm. Flipped the plug and pp myself ,it was off to the side of the hole. I widened to hole and low and behold silver, a 38 dime, what a way to start with a brand new machine love it .
Cheers and HH