Ronstar
Well-known member
Back up to the EMI Hell zone, you’ld think I was into pain and punishment. But I keep getting little bits and pieces……
Managed to get the upper EMI quieted by dropping to 4khz and reducing threshold to 25. Got a repeatable signal in the 40s on the Legend and pulled a 1917 wheat. A few minutes later out pops a 1924S wheat so hoping but I had a glitch occurring in finding it. It may have been quiet above ground but the minute I turned on the carrot it started a slow vibration. No matter where I put it to the ground it started vibrating. I was lucky this time as I was able to touch the coin and it locked on. Detector quiet, carrot noisy.
Started to move away and hit deep nickel, same problem with the handheld but again I was able to almost touch it so I did get it, 1952 nickel.
Nothing much more exciting until I got one more wheat….. date unreadable and coin mildly blemished with pock marks like a zinc gets. Figured it would clean up once home.
Soaked it and attacked it with the toothbrush and now I can see 191 and a D below the date. Started lightly brushing with a brass brush and it was getting easier to get the last number but still not sure. Second mistake? To use a bit more muscle to scrub. First mistake? Scrubbing on a 1914D penny.
I do not think this would have even come close to grading G4 and no idea if that thing could have been cleaned up to make that point. No way to know if dud as cant see if VLB initials are on shoulder nor will I ever be able to know that. Sorry I ruined a 1914D, happy at least I know what the numbers are!!!
1914 on the left then 17 then 24. The D is visible using 10x loupe.
Managed to get the upper EMI quieted by dropping to 4khz and reducing threshold to 25. Got a repeatable signal in the 40s on the Legend and pulled a 1917 wheat. A few minutes later out pops a 1924S wheat so hoping but I had a glitch occurring in finding it. It may have been quiet above ground but the minute I turned on the carrot it started a slow vibration. No matter where I put it to the ground it started vibrating. I was lucky this time as I was able to touch the coin and it locked on. Detector quiet, carrot noisy.
Started to move away and hit deep nickel, same problem with the handheld but again I was able to almost touch it so I did get it, 1952 nickel.
Nothing much more exciting until I got one more wheat….. date unreadable and coin mildly blemished with pock marks like a zinc gets. Figured it would clean up once home.
Soaked it and attacked it with the toothbrush and now I can see 191 and a D below the date. Started lightly brushing with a brass brush and it was getting easier to get the last number but still not sure. Second mistake? To use a bit more muscle to scrub. First mistake? Scrubbing on a 1914D penny.
I do not think this would have even come close to grading G4 and no idea if that thing could have been cleaned up to make that point. No way to know if dud as cant see if VLB initials are on shoulder nor will I ever be able to know that. Sorry I ruined a 1914D, happy at least I know what the numbers are!!!
1914 on the left then 17 then 24. The D is visible using 10x loupe.