Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Legend headphones frozen , green light on all the time

Reading the HP Users Guide, the green LED means the HPs are turned on. Steady on indicates it is paired with a device,
You might try Un pairing the HPs. then Re pairing with your Legend.
 
Not sure about the Legend phones, but when I bought aftermarket wireless ear buds, I had to UN pair what I was using earlier before the earbuds would pair….
 
The headphone power switch won't switch the green light off. The headphones seem to be locked or unresponsive . All I have is a green led.
 
Do they still work with the detector powered on? Did you try to re pair them? You may try putting them on the charger or wait till they run down. You can always call Andy at the Repair Center.
 
JCR TX said:
Do they still work with the detector powered on? Did you try to re pair them? You may try putting them on the charger or wait till they run down. You can always call Andy at the Repair Center.
Click to expand...
I will wait for the battery to drain off , how many hours would it take though. One led won't be sucking hardly any juice out of the battery
 
synthnut said:
Not sure about the Legend phones, but when I bought aftermarket wireless ear buds, I had to UN pair what I was using earlier before the earbuds would pair….
Click to expand...
Would this cause the power switch on the phones to not work though. I can't switch the headphones off. The switch is doing nothing to cut the power. Faulty switch possibly. These headphones are poor quality cheap builds.
 
CoinRobber said:
Would this cause the power switch on the phones to not work though. I can't switch the headphones off. The switch is doing nothing to cut the power. Faulty switch possibly. These headphones are poor quality cheap builds.
Click to expand...
The wireless headphones that came with the Legend work better then any I have connected to the Legend, especially if you use the threshold they are the only ones that I have found that work good when running with a threshold, have tried several different Low Latency earbuds and none of them have worked properly with the legends threshold

the one thing I have noticed with the wireless headphones that came with the legend is if your Bluetooth is active on your cell phone or anything else for that matter the Nokta/Macro wireless headphones will automatically connect with what ever Bluetooth and I have to then shut the Bluetooth off on everything so they will connect with the Legend
 
oldkoot said:
The wireless headphones that came with the Legend work better then any I have connected to the Legend, especially if you use the threshold they are the only ones that I have found that work good when running with a threshold, have tried several different Low Latency earbuds and none of them have worked properly with the legends threshold

the one thing I have noticed with the wireless headphones that came with the legend is if your Bluetooth is active on your cell phone or anything else for that matter the Nokta/Macro wireless headphones will automatically connect with what ever Bluetooth and I have to then shut the Bluetooth off on everything so they will connect with the Legend
Click to expand...
The headphones have been tested by service centre and have been found to have a faulty switch , this is now a common fault with these head phones they inform me. . Part of the switch comes off inside the head phones.
absolute rubbish idea putting a mechanical switch on head phones. The switch is very poor quality. Good audio on these phones but the weak link is the on off switch. Failed after about 5 months use.
You will need a torx "star" screwdriver bit , and it's very very small, i had to order a set of screwdrivers off amazon as my bits were too big to unscrew the 3 screws.
 
Last edited:
CoinRobber said:
The headphones have been stripped down by me and have been found to have a faulty switch , this is now a common fault with these head phones they inform me at nokta. . Part of the switch comes off inside the head phones.
absolute rubbish idea putting a mechanical switch on head phones. The switch is very poor quality. Good audio on these phones but the weak link is the on off switch. Failed after about 5 months use.
You will need a torx "star" screwdriver bit , and it's very very small, i had to order a set of screwdrivers off amazon as my bits were too big to unscrew the 3 screws. The phones are cheap china made rubbish IMHO.
Click to expand...
 
CoinRobber said:
The headphones have been tested by service centre and have been found to have a faulty switch , this is now a common fault with these head phones they inform me. . Part of the switch comes off inside the head phones.
absolute rubbish idea putting a mechanical switch on head phones. The switch is very poor quality. Good audio on these phones but the weak link is the on off switch. Failed after about 5 months use.
You will need a torx "star" screwdriver bit , and it's very very small, i had to order a set of screwdrivers off amazon as my bits were too big to unscrew the 3 screws.
Click to expand...
will Nokta/Macro not replace under warranty, they should since there is a 3 year warranty
 
CoinRobber said:
No they don't replace. They repair them.
Click to expand...
well that is not good especially if it is a known issue, with the headphones so who does the repair because it sounds like you are doing the repair your self which is not good either in my book
 
This is the first I have heard of this.
 
JCR TX said:
This is the first I have heard of this.
Click to expand...
Pretty much a waste of time fixing them , the switch quality is very poor. Just a matter of months before the switch fails again. I have binned the junkers.
 

Attachments

  • h1 (2)-min.JPG
    h1 (2)-min.JPG
    1.3 MB · Views: 89
CoinRobber said:
Pretty much a waste of time fixing them , the switch quality is very poor. Just a matter of months before the switch fails again. I have binned the junkers.
Click to expand...
CoinRobber said:
Pretty much a waste of time fixing them , the switch quality is very poor. Just a matter of months before the switch fails again. I have binned the junkers.
Click to expand...
The Build quality of the Legend Head Phones i will rate as a 4 out of ten for overall strength , they are home audio headphones , not made for out door
rough conditions, not strong at all, audio quality gets a definite 9 out of ten. Reliability is also sadly a low score at 3 out of 10 mostly the switch will be
the number 1 failure. Comfort scores a 8 out of ten , they are comfortable. If you were to make an air craft with parts as low quality as this then i am sure
you would on the ground in a thousand bits within no time :oops:
 
JCR TX said:
Do they still work with the detector powered on? Did you try to re pair them? You may try putting them on the charger or wait till they run down. You can always call Andy at the Repair Center.
Click to expand...
The Headphones are now working fine , i had to wait till the battery went flat on the phones which takes 5 weeks. Re charged them and now they work ok. I can't understand why they malfunctioned in the first place though.
 
You must log in or register to reply here.
Top