Silvereagle3
New member
I own from new a whites 6000 di pro.Resister R96 is smoking I think it is 33 ohms.Unit isn't working.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
I own from new a whites 6000 di pro.Resister R96 is smoking.I think it's 33 ohms.Any help as to what could cause this.Unit isn't working.
- Thread starter Silvereagle3
- Start date
silverseeker 2
Well-known member
Send her into Centerville Electronics. They'll fix you up if they have the parts. Good luck
silverseeker 2
vito
Well-known member
x2 - Your best bet I think.Send her into Centerville Electronics. They'll fix you up if they have the parts. Good luck
silverseeker 2
Carl-NC
Active member
It's a 0.33Ω current sense resistor, at the input of a switching boost regulator. There are two probable causes; (1) the switching regulator itself is blown or (2) something downstream from the regulator has shorted. You should hope for #1 as it is far easier to find & fix.
Centerville is mostly a board-swap repair, unless this is a known problem I'm not sure they'll be able to help. They almost certainly won't have a replacement board.
C.J.M.
Well-known member
Very nice Vato.
Odanscoils
Well-known member
From what you posted I'd venture to say you could repair it.
Making an offer ??
Would you need a scope to fully troubleshoot this issue. Or just a good multi meter ?
I'd love to know if you could help me run down a crank no start 2012 F150.
Been layed up three weeks now. PM me if so.
silverseeker 2
Well-known member
Just wondering since Garrett bought out Whites if they could give you a lead on parts or Repair? I'm sure Whites had to have some old parts laying around. Jmho...
silverseeker 2
Odanscoils
Well-known member
I wonder if Garrett would repair it.
The 6000 Di Pro was my first brand new in the box detector I bought shorty after it became available.
All I had was a few used beat-up detectors prior. BFO, T/R kind of stuff. The 6000 was like years ahead to me when I got it - really had a lot of good times with it.
All I had was a few used beat-up detectors prior. BFO, T/R kind of stuff. The 6000 was like years ahead to me when I got it - really had a lot of good times with it.