Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

I am for the first time ever Beach hunting in SC. Any tips on the settings for the Manticore? THanks

nalc472

Active member
Any tips? Should I use the 11 or 6 inch coil. I do have a sand scoop.
 
The South Carolina beaches are severely sanded in, I would suggest using Tom Dankowski's program, but you may need to cut down the ferrous volume to keep your sanity. I use the red line indicator to avoid iron, but you have to keep your passes really short and do a cross pass as sometimes good targets can masquerade as red iron. Low tide I believe is mid to late afternoon, that's going to be your best area. I hope you get lucky!

Tom Dankowski's program

Beach Low Conductors Mode
Volume: 25
Ferrous Volume: 25
Recovery Speed: 4
Discrimination Pattern: All Metal
Ferrous Limits: Upper = 4, Lower = 0
Nothing Notched out. (Bring in the iron).
Audio Theme = Prospecting
Ground Balance the unit close to the edge of the saltwater
[States Tom…]

Run Sens on 24 or 25 or 26… depending / dictated by the salt-content of your particular beach. (Start at 24….. and see how stable the unit is. Then bump-up Sens accordingly).
 
Top