Ground Balancing

[wrong way ron]

While ground balancing I hold the V3 waist high squeeze trigger and hold enter. I lower the coil to the ground and pump the coil 4 to 5 times any where from 1 inch to 12 inches and sometime the screen will lock up and not move from the start up screen what up any suggestions.

 

[BHNugget]

Shouldnt be in the start up screen,you should be in search mode for whichever program your using.I dont bother with the waist high method like a person would with the DFX.I just find a clear spot using pinpoint and hold the coil to the ground then pump it.Make sure to release the enter button first or it'll be locked in pinpoint.

 

[magicpsn]

Shouldnt be in the start up screen,you should be in search mode for whichever program your using.I dont bother with the waist high method like a person would with the DFX.I just find a clear spot using pinpoint and hold the coil to the ground then pump it.Make sure to release the enter button first or it'll be locked in pinpoint.

Same here...When I turn it on I squeeze the trigger twice to get in search mode...squeeze trigger and find a clean spot for balancing...Like Nugget I don't do the waist high thing! Also, If you have Autotrack on, it will rebalance as you hunt. Usually I have mine off and rebalance when I want to.