Gpx 4500 relic settings?

[soky72]

I had some relic settings a guy gave me that were given to him while hunting a DIV in Culpepper. They worked well but I've tried tinkering with the setup and have since lost those original settings and my detector was pretty unstable the last hunt. Can I get some input on what others are running including the front panel switch settings? I'm afraid I may have a switch or setting off. Thanks in advance.

 

[anbenson]

I'm kind of new to the GPX but here are some settings I picked up somewhere for DIV, they might be for the 5000 but most should transfer to the 4500 or be close..

Front panel
Deep
Special
Double D
Fixed

Rear panel
Volume limit 12
GB type: general
Special: Sensitive Extra or Sharp
Motion: Slow
Gain: whatever is stable
Audio: Quite or normal
Audio Tone: 38
Stabilizer: 5 ish
Signal peak: 17
Target Volume:12
Response: normal
Iron reject 5

 

[soky72]

Excellent, thanks!

 

[filternozzle]

I had some relic settings a guy gave me that were given to him while hunting a DIV in Culpepper. They worked well but I've tried tinkering with the setup and have since lost those original settings and my detector was pretty unstable the last hunt. Can I get some input on what others are running including the front panel switch settings? I'm afraid I may have a switch or setting off. Thanks in advance.

You really need to get to know the controls of the GPX or you are never going to be able to get the best performance from it.

Read and re-read the Instruction Manual until you fully understand the function of the manual controls at the front end of control box and the Functions/Settings in the LCD menu at the rear of the control box.

Yes it will take time but keep at it and you will eventually be in a position where you will be able to set up the GPX to give its best performance for whichever site you are on.

Good luck.