Hi all - I have been asked by a friend to help locate property markers. All I know is his property boarders the empty lot that has just been sold. He says he has an idea where they are. From what I can tell, the area should be relatively trash free. Any tips to help me make this a success? I have a Simplex with stock coil and SP24 coil. Thanks in advance!
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Finding Property Markers - Any Tips?
- Thread starter rick78
- Start date
Odanscoils
Well-known member
Look for the big rock solid signals.
Older can be concrete with iron.
Newer are a pipe or big rebar with a copper or alloy cap.
Usually clear loud signal.
Good Luck
Older can be concrete with iron.
Newer are a pipe or big rebar with a copper or alloy cap.
Usually clear loud signal.
Good Luck
david bull
Well-known member
Turn down the sensitivity and sweep about six inches off the ground…Probably more trash than you can imagine.
michael NY
Active member
Best of luck to ya I found rebar markers for a friend of mine he had a general idea so many feet from the road and I found them.
Finally got to the property last evening. Initial guess as to where the marker was located was a bit off but found it rather easily using all metal mode. Used SP24 because I didn't feel like changing coils. Friend had already located one himself so I just took a reading off that and machine screamed when I hit it. Thanks all.