Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Equinox 900 readings

A

Attroll

New member
I really need some help here.
I don’t know if I have a faulty Equinox 900 or if I am doing something wrong.
I have two issues.

The mode I am using is Parks #1.
I am in a 200-year-old farmhouse that has been in the family for seven generations.
I am in the front yard.
We have no underground pipes or wires here.

My settings.
As I said I am in Parks #1.
I did a factory reset of Parks #1 before I started.
I did my ground balance and noise cancelation.
I have tried my recovery speeds set from 0 to 5 and the issue persists.
I have all metal off.
The problems that I am having are my readings.
I have a phone, but it is in airplane mode with Wi-Fi and Bluetooth both turned off.
I tried to attach a video show this but it will not let me attach a video.

Issue #1.
The readings are not consistent no matter how many times I go over the same spot.
I have tried this in many locations around the front yard and even went to another location and it continues.

Issue #2.
Also, you can see that as the sound changes the readings are not changing. When the readings do change it seems like there is a delay.

I am pulling my hair out trying to figure out what I might be doing wrong.
Am I doing something wrong?
I would appreciate any advice I can get.

Rick
 
Attroll said:
I really need some help here.
I don’t know if I have a faulty Equinox 900 or if I am doing something wrong.
I have two issues.

The mode I am using is Parks #1.
I am in a 200-year-old farmhouse that has been in the family for seven generations.
I am in the front yard.
We have no underground pipes or wires here.

My settings.
As I said I am in Parks #1.
I did a factory reset of Parks #1 before I started.
I did my ground balance and noise cancelation.
I have tried my recovery speeds set from 0 to 5 and the issue persists.
I have all metal off.
The problems that I am having are my readings.
I have a phone, but it is in airplane mode with Wi-Fi and Bluetooth both turned off.
I tried to attach a video show this but it will not let me attach a video.

Issue #1.
The readings are not consistent no matter how many times I go over the same spot.
I have tried this in many locations around the front yard and even went to another location and it continues.

Issue #2.
Also, you can see that as the sound changes the readings are not changing. When the readings do change it seems like there is a delay.

I am pulling my hair out trying to figure out what I might be doing wrong.
Am I doing something wrong?
I would appreciate any advice I can get.

Rick
Click to expand...
Do you have another coil to try ?
 
Attroll said:
I really need some help here.
I don’t know if I have a faulty Equinox 900 or if I am doing something wrong.
I have two issues.

The mode I am using is Parks #1.
I am in a 200-year-old farmhouse that has been in the family for seven generations.
I am in the front yard.
We have no underground pipes or wires here.

My settings.
As I said I am in Parks #1.
I did a factory reset of Parks #1 before I started.
I did my ground balance and noise cancelation.
I have tried my recovery speeds set from 0 to 5 and the issue persists.
I have all metal off.
The problems that I am having are my readings.
I have a phone, but it is in airplane mode with Wi-Fi and Bluetooth both turned off.
I tried to attach a video show this but it will not let me attach a video.

Issue #1.
The readings are not consistent no matter how many times I go over the same spot.
I have tried this in many locations around the front yard and even went to another location and it continues.

Issue #2.
Also, you can see that as the sound changes the readings are not changing. When the readings do change it seems like there is a delay.

I am pulling my hair out trying to figure out what I might be doing wrong.
Am I doing something wrong?
I would appreciate any advice I can get.

Rick
Click to expand...
Install the 6 in. coil. Do a factory reset, Try Field 2. This combo will be more stable than Park 1. If still jumpy try the single frequencies, if it still persists try another location. If that doesn't work contact Minelab. Good luck Mark
 
I was able to go to another site today and the sounds got better, and the readings seems to get better. I still don’t think that they are right. I wish there was someone in my area with knowledge of the Equinox 900 that I could consult (Denmark, Maine).
I did notice two things.

#1, The readings still have about a 4 second delay sometimes after I hear the sound.
Is this a common thing?

#2. I noticed if I bumped my coil against a tree or rock it would give me a reading 63 sometimes.
Does this happen to anyone else?
 
Attroll said:
I was able to go to another site today and the sounds got better, and the readings seems to get better. I still don’t think that they are right. I wish there was someone in my area with knowledge of the Equinox 900 that I could consult (Denmark, Maine).
I did notice two things.

#1, The readings still have about a 4 second delay sometimes after I hear the sound.
Is this a common thing?

#2. I noticed if I bumped my coil against a tree or rock it would give me a reading 63 sometimes.
Does this happen to anyone else?
Click to expand...
That delay is not normal…
As far as making a sound when hitting against something, I think that does happen although I try not to let that happen, but it does happen sometimes.
One question… after noise cancelling and ground balancing, are you pushing the detect button to put it back in detecting mode?
Also, did you try running a single frequency to see if you get te sake results?
Just curious.
 
You must log in or register to reply here.
Top