Blank Sheet for Recording Custom Settings

[nwdetectorist]

Blank Sheet for Recording Custom Settings for my Nox 800

OK, Ok; back in the day of my XLT Spectrum...
...I had a notebook full of custom settings for my records.

Now I can convert (scan and save as) to Word Document or Adobe Acrobat to save and carry with my Smart Phone.

Problem is, I cannot seem to find a sheet to copy online.
I know I could create my own, but...

HELP!

 

[nwdetectorist]

OK; what order for the Equinox Settings Sheet???

1. What preset program to start with
2. How many tones; 2, 5, 50
3. Ground balance setting and/or auto balance
4. Setup accept/reject notches for your hunt site or hunt style
5. Select Volume for each tone region
6. Select Tone Pitch for each tone region
7. Set tone break, preferably at 1
8. Set recovery speed for conditions or accept default
9. Run Noise Cancel
10. etc. etc. etc.

what am I forgetting

 

[nwdetectorist]

Here is my spreadsheet; mistakes and all.
DAMMITT!!!
Excel Spreadsheets are not allowed as attachments.
I am attaching a snapshot of what has been created so far.

 

[nwdetectorist]

Here is my spreadsheet; mistakes and all.
DAMMITT!!!
Excel Spreadsheets are not allowed as attachments.
I am attaching a snapshot of what has been created so far.

OK; maybe an older version of MS Excel with less capabilities might be up loadable.
Here goes...

NOPE!!!

 

[BigTony]

In the back of the Explorer II manual minelab had a printed blank spread sheet of all its settings. My friend and I would trade our new ideas and we enjoyed it.
Your right - now a days it’s limited from the manual.
So take the manual out and write down all of the settings listed to create your blank forms, make a bunch of copies and your on your way.
Tony

 

[nwdetectorist]

In the back of the Explorer II manual minelab had a printed blank spread sheet of all its settings. My friend and I would trade our new ideas and we enjoyed it.
Your right - now a days it’s limited from the manual.
So take the manual out and write down all of the settings listed to create your blank forms, make a bunch of copies and your on your way.
Tony

Thanks Tony --- that is what I am doing with an Excel Spreadsheet.
Once I get it figured out, I will convert to PDF and share.
Still tweaking things and relearning MS Excel since it has been over a dozen years since last use and/or classes in MS products.

 

[fwcrawford]

OK; what order for the Equinox Settings Sheet???

1. What preset program to start with
2. How many tones; 2, 5, 50
3. Ground balance setting and/or auto balance
4. Setup accept/reject notches for your hunt site or hunt style
5. Select Volume for each tone region
6. Select Tone Pitch for each tone region
7. Set tone break, preferably at 1
8. Set recovery speed for conditions or accept default
9. Run Noise Cancel
10. etc. etc. etc.

what am I forgetting

Don’t forget iron bias setting also.

 

[nwdetectorist]

I found a JPG sheet on TreasureNet that will work for now.

 

[nwdetectorist]

Don’t forget iron bias setting also.

Indeed, and thanks for the reminder.