ALUMINUM CAN REJECT PATTERN

[Elmy]

Reject most aluminum cans ...tops....even large pieces of aluminum cans ripped in half by mowers and
farm tractors....does not disc out regular size can slaw.

Something totaly different as far as patterns I have posted.
This is a pattern that you load into one of the six pattern slots and use the combine
feature in the discrimination options. This pattern should be turned black using the +/-
keys in the combined pattern settings and your regular hunting pattern should be white.

Load the pattern you want to hunt with and then go to discrimination settings...
scroll down to combine and add your regular pattern, left arrow...now go to the aluminum reject pattern
and load it...except this is a reject pattern and turn this one black....you should see your
pattern on your screen but it will have the aluminum can reject pattern blackened out now.
Press the detect button and save to smart find...choose yes...and now you can hunt in an area that
is littered or known to have a lot of aluminum cans...like a "FAIRGROUNDS" area near the road.
OOPS...I may have let out a secret there ...but it is near the front gate entrance....
strong winds will blow these cans to the eastern side of the grounds and end up buried near
the fenced in area.

Now a look at the aluminum can reject pattern

Interested in this pattern....let me know.

 

[HighPlainsHunter]

I will add this to the others you have posted, and will give it a try if I find myself in such an environment. I'm assuming the red square at 01,01 is just the resting place for your cursor?

Thanks again for sharing...

 

[Elmy]

I will add this to the others you have posted, and will give it a try if I find myself in such an environment. I'm assuming the red square at 01,01 is just the resting place for your cursor?

Thanks again for sharing...

yes