WOT ?

[SurfPro]

Question for you WOT users. I picked up 2 WOT coils and both have the same issue with the coil covers. Each one has it's own cover and they're not interchangeable. They fit very snug around the circle, but in the middle they have a 1/4" bow. I can literally push the cover in 1/4" before it touches the coil. When I get home and clean them they're loaded up with sand, which adds to their weight. They're heavy enough as it is without the wet sand added. Wondering if this is normal or should I take it up with the seller.

Thanks,
SP

 

[bootyhoundpa]

ya, mine is also kinda loose in the middle and gets heavier from trapped sand....

 

[RandyNorthridgeca]

I've been using mine for years without the cover and its still going strong!

 

[ZOFCHAK]

^^^^ Yep, ditch the covers. Even when they fit well they still fill with sand and add drag and weight. The WOT coils can take a beating, and if you happen to wear one out due to a lack of a cover you'll have paid for with gold many times over.

 

[SurfPro]

Ok, I'll get rid of the cover. FYI: I used zip ties to secure it. Thanks a lot!