winner1776
New member
I have a new 12" coil that go's to the Beach Hunter 300. This coil will also work with the DFX MTX. It's my understanding that it is the same coil. The coil has 4 wires coming out of the cable. The four wires are - (1) - ground (2) + clear (one pair) and (3) - ground (4) + red (the other pair). The coil has the measurements of 3.3 ohms for one pair (ground and clear) and 41.4 ohms (ground to red) coming out of the other pair. I need to solder these 4 wires to a connector (don't have the part number but I believe it is a 5 pin female connector). I don't have the proper wiring to connect which wires to what pins in the connector which will plug into the DFX or MTX.The coil came with only 4 wires coming out of the cable which was meant to hardwire into the Beach Hunter 300. I want to solder a connector to the end of the cable and plug it into the DFX or MTX. I can find a 5 pin connedctor at the electronics store but I don't have the proper wiring to solder the 4 wires to the connector and don't have a DFX or MTX to get the wiring from. I have called White's and can't get an answer. winner1776