Where do I get a waterproof conector cover like this one?

[Charles (Montreal Canada)]

I'm looking to get a connector conver like this one, where can I found one?

Thank

Charles

 

[HighPlainsHunter]

Charles,

If you have a "Big Box" type of hardware store in your area, you should be able to make your own. All you need is the correct size clear tubing to fit over the cable connectors, two rubber plugs, and two clamps. You will need to drill a hole in the center of the rubber plug that is just slightly smaller than the coil cable diameter. I find that if I freeze the rubber plug that the hole is easier to drill. Drill it slowly. Then you will need to slit the plug from the edge to the hole so that you can slip the plug over the cable. Then put both plugs into the clear tubing, and tighten the clamps. I would also recommend testing the "waterproof" connection in a tub of water to make sure there are no leaks.

Hope this helps,
HighPlainsHunter

 

[Charles (Montreal Canada)]

Thank, I think that's what I will do. I can get the plug and the clamp at ACE, then the Tygon tube at Home Depot or somewhere else. GOOD trick to freeze the rubber plug..! Will help the drilling for sure..! thnak

charles

 

[Mel Parker]

n/t

 

[Charles (Montreal Canada)]

Just received my adapter today from dmobx.com, only two days after I ordered it. Now, I have to set-up the waterproof connection cover.