What mode and settings are you guy using for water detecting?

[tejon_man]

Im looking for recommendations for lake and beach hunting to find coins and gold rings.

 

[BarryL]

I always run mine in PRO Zero Mode and sens at about two bars below top

 

[tejon_man]

I should have mentioned that im looking for settings for at at gold....

 

[mudpuppy]

Like Barry, I run Pro zero mode 40 disc. sens two bars from top, iron audio off..it has NO problem hitting deep nickels and is stable and does not false on the sand ripples with the sens set there, the dang thing hits small rings and gold of all sorts, will not miss a silver ring or coin either...good luck
Mud

 

[John-Edmonton]

Pretty much the same as land....with/without iron audio on. Sometimes I decrease the sensitivity down a down a notch or two to decrease the chatter.

 

[GroundScanner]

On the AT-Gold i run mine at disc.1, iron @ 30 and 7/8 sens. And sometimes all metal when slim pickings with same setting as disc. 1

 

[ajaj]

Again,for freshwater, same as if you were on dry land. For salt water, ground balance frequently; usually 90ish for dry white sand, 15ish for wet sand. Expect chatter in the wet sand.

aj