waterproofing sov gt

[rjnail]

Been working on my sov gt. Installing the sov gt in a ikelite housing for about month now, dont have all the parts in yet, the control knobs will be here on monday so drilling the hole for them as soon as they come in, the permanent cord connector is installed for the wot 15" coil. coil is expoy so not to use the coil cover for trapping sand in it. I oder 4 waterproof control knobs 1 for the on and off , sensitivity,threshold and the disc. did not want one for the notch . this helps if adjustment are needed while in the water. also left about 7" of coil cable in the housing when batties need changing all the holes i drill are then tapped. headphone will have a 2 pin ics plug, and using the grey ghost underwater headphones. i had a old fisher hip mount kit i expoy it to the side of the housing so i can use a dive belt around my waist . I could had use a cheaper housing and parts but after useing ikelite housing and part for many of years im use to ikelite parts and housing, well hope to be done with it in about aweek will post finsh photos, will test it out before trip to va beach next month.