I went to the beach this week with my Vaquero and had a rough time on the salt water beaches of Southern California. I could not get the detector to ground balance at the waters edge. Does someone have experience with these detectors on the salt water beaches? I was hoping someone could pass along the best way to use the Vaquero in this situation. I'm willing to bet that there is someway to overcome this problem. BTW, I was using the stock search coil.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Vaquero on the So. California salt water beaches?
- Thread starter gsbergman
- Start date
There are some single frequency detectors that will ground balance to the wet salt and do well. The Vaquero does not ground balance to the wet salt. I don't believe any of the Tesoro VLF detectors do. Some one please correct me if there is one or more that do, I have not used them all by any means!
I've hunted the opposite coast from you so some of the general mineral conditions are likely to be different. What I found works best for me is a smaller coil (one of the 5.75 inch coils); set up the threshold for a usable threshold for pinpointing over the dry sand (normal and not super tuned), ground balance it over the fully dry sand (not damp) that is in the general area of the wet sand you want to hunt, keep that ground balance setting. Turn the discriminator to the low side of the foil mark (above iron but not as high as mid-foil range). Walk to the wet sand and turn the sensitivity down until you are OK with the amount of falsing you get. Good targets are repeatable responses as the coil sweeps back and forth across them, most of the falsing does not repeat. Coil presentation is very important (the more even you keep the coil distance from the sand as you sweep, the fewer false responses you get). You will not detect at the depths you do over the dry sand.
I have other detectors that I use over the wet sand areas and in the water. I now mostly leave the single frequency VLF detectors home when on beach trips. I do like a clean sweep coil for dry sand work if I have room to pack a third or fourth detector for the trip. A Tesoro with the clean sweep covers a lot of area, is sensitive to small gold, and has turned up dry sand gold for me, but there seems to be more gold to be found in the wet sand and water.
Cheers,
tvr
I've hunted the opposite coast from you so some of the general mineral conditions are likely to be different. What I found works best for me is a smaller coil (one of the 5.75 inch coils); set up the threshold for a usable threshold for pinpointing over the dry sand (normal and not super tuned), ground balance it over the fully dry sand (not damp) that is in the general area of the wet sand you want to hunt, keep that ground balance setting. Turn the discriminator to the low side of the foil mark (above iron but not as high as mid-foil range). Walk to the wet sand and turn the sensitivity down until you are OK with the amount of falsing you get. Good targets are repeatable responses as the coil sweeps back and forth across them, most of the falsing does not repeat. Coil presentation is very important (the more even you keep the coil distance from the sand as you sweep, the fewer false responses you get). You will not detect at the depths you do over the dry sand.
I have other detectors that I use over the wet sand areas and in the water. I now mostly leave the single frequency VLF detectors home when on beach trips. I do like a clean sweep coil for dry sand work if I have room to pack a third or fourth detector for the trip. A Tesoro with the clean sweep covers a lot of area, is sensitive to small gold, and has turned up dry sand gold for me, but there seems to be more gold to be found in the wet sand and water.
Cheers,
tvr
dixiedigger57
Member
it did not with my original Eldorado. I tried it and the falsing was not worth it. 10 turn did not do it. a friend told me he did it with his exact same unit, only low sense and if it hits the sand, it falses. thats not worth the hassle. reason to buy one of the sharks! i have not tried my sabre or amigo, but have friend says his bandito works. east coast conditions. see---we need more than one detector!