Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
V3 video part 2
- Thread starter Bill_S
- Start date
earthmansurfer
Active member
Nice video Bill and Nice camerawork - as it's nice to see the screen as well as the target dig.
Was a good dig with the multiple targets - shows you just can't focus on a solid repeatable signal all of the time.
I'm sure a lot of the guys appreciate the videos. Any chance of showing how you set the machine up (using ground probe, filters, recovery, sens., etc.) as that would help those new to the detector? Just an idea.
I'm ready to see you dig some silver
Was a good dig with the multiple targets - shows you just can't focus on a solid repeatable signal all of the time.
I'm sure a lot of the guys appreciate the videos. Any chance of showing how you set the machine up (using ground probe, filters, recovery, sens., etc.) as that would help those new to the detector? Just an idea.
I'm ready to see you dig some silver
Super video Bill. There was a lot to learn. Now to finish the post, we know you were in Missouri.
What program were you running? What were your settings?
For the video guys, what kind of camera do you have? How did you have it mounted? Really a great job of how a video should be shot and what should be included. Many videos are not worth the effort.ROB
What program were you running? What were your settings?
For the video guys, what kind of camera do you have? How did you have it mounted? Really a great job of how a video should be shot and what should be included. Many videos are not worth the effort.ROB
Thanks for the comments. I will try to answer the questions you have asked. Heres how I setup the detector. I just got it so I still have a lot to learn but anyway here goes. I set the vco to on, turned off modulation, modified the stock coin program, accepted 17-21, 51-94, I then assigned a tone to range 17-21, then a little higher tone to 51-71, and an even higher one to 71-94. I had the recovery on 60. I think I had the rx gain around 10 and the disc on about 80. cant really remember, I have played with it so much. I did not use the tx boost.
I used a flip ultra HD video camera. I did not have it mounted when filming the screen but used a small tripod to set it on the ground while filming the digs.
I used a flip ultra HD video camera. I did not have it mounted when filming the screen but used a small tripod to set it on the ground while filming the digs.
