Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

USEING A PROBE

handsome3096

New member
HOW DO U USE A PROBE DO U PUSH IT IN THE GROUND AFTER U HAVE DETECTED AND ITEM AND PIN POINTED WITH YOUR DETECTOR TO SEE IF U CAN TOUCH THE PIN POINTED TARGET
 
No, you will damage it if you do. Although you could do that in beach sand, I wouldn't recommend it still, as sand works like sand paper, and you will eventually ruin the housing.
The instruction manual gives a fair amount of good information on using it.:poke:, but basically, turn it on and scan over the ground where you suspect your target to be. It will tell you exactly where it is. If you cut a pug and wanted to locate a target in the hole, then you just move it around in the whole, listening for the strongest signal. The side of the probe gives a stronger signal than the tip, so you will get better depth, if you scan with it horizontal to the ground. You can use the tip to hone in on a target though.
Mick Evans.
 
if it"s the metal type yeah i poke it in the ground after i"v pinpointed the target as small as i can i start by poking it dead center then if i don't hit it i start moving out from there in a circle around the centre till i hear the nice metal on metal sound.
i only use probing when hunting shallow coins ( up to 3-4 inch deep ) i don't use this hunting for old coins as it can damage the coins.
hope this helps
lazyaussie
 
Where I live and hunt an old coin is dated around 1975. Only two silver coins to my credit so far so when I stick the probe onto the ground I can be a bit more agressive than most.
The nice thing in hunting like this is I can hit my target and give a bit more push to the probe. Often times aluminum can pieces can be punctured and simply walked away from.
 
Yeah you can tell if you hit a coin, aluminum, or a bottlecap. The latter two you can puncture and walk away. Coins have that solid feel.

Bill
 
Top