Tracking question

[reconj]

When going to the Tracking to GB, should the coil be on the ground ? Thanks

 

[Andy Sabisch]

TRACKING simply means the machine will track to changes in mineralization . . . . . . you can either swing the coil several times across the ground to get the two numbers on the rigfht to match or go to the PUMPING option and set the GB . . . then set it to TRACKING.

When you power the unit up be sure to hold the coil in the air away from any metal until the coil light stops fast flashing ., . . then lower to the ground and start hunting

Hope this helps

Andy