Threshold pot help required please

[trigger]

I've a problem with the threshold pot on my Euro Sabre.
Do any of you guys know the spec of the pot i require please.
The white wire has snapped off the rear of the pot. It has snapped off too close to the pot itself to enable me to resolder the wire back on. So a new control is needed.. to put it back in full working order

 

[Sven]

Look at the backside of the pot, it will give you a number. Probably it will read 100k
It is a Linear pot made by Alpha sold by Mouser, Digi-Key, Jameco, etc.
Common cheap pot. Look up 100K 16mm pot you'll find it's only about $2.00

http://ca.mouser.com/ProductDetail/Alpha-Taiwan/RV16AF-10-15RI-B100K-0C/?qs=sGAEpiMZZMtxdMMi52izyrXCKxzy%2fVunfUlc6gWWoOk%3d
http://ca.mouser.com/catalog/catalogUSD/639/691.pdf
or you can go with the 12mm pot, a bit smaller and gives extra room, you will need a diff. knob as the pot shaft is smaller.

 

[Zectron2348]

n/t

 

[trigger]

Many thanks for your very kind help.
I might look at the smaller pot. Good tip that.Thank you again

 

[Hombre]

Another option would be to spend $15 and ship it to Tesoro, They will fix it and ship it back to you for FREE!

 

[trigger]

Hi There. The only problem with that,is i'm in the UK. And they would charge me more than that to send it back to tesoro. Plus to have it repaired here would be quite expensive:sad:

 

[dahut]

Look at the backside of the pot, it will give you a number. Probably it will read 100k
It is a Linear pot made by Alpha sold by Mouser, Digi-Key, Jameco, etc.
Common cheap pot. Look up 100K 16mm pot you'll find it's only about $2.00

http://ca.mouser.com/ProductDetail/Alpha-Taiwan/RV16AF-10-15RI-B100K-0C/?qs=sGAEpiMZZMtxdMMi52izyrXCKxzy%2fVunfUlc6gWWoOk%3d
http://ca.mouser.com/catalog/catalogUSD/639/691.pdf
or you can go with the 12mm pot, a bit smaller and gives extra room, you will need a diff. knob as the pot shaft is smaller.

Sven comes through again. He's a monster.