Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

the proper detector hunting underwater

miniprobe

New member
For over 10 years hunting gold use currently metal detectors, we will find it is very difficult to searching out gold underground ( less than 2 meters deep ), how to detecting deeper and where we can hunting dose the key problem to us


Developing new model to meet market demand is my duty to support professional hunter who can find gold to be rich or for fun faster and easy operating, and yes over 90% metal detecting activity is just for sport and fun but can find the treasure is the main purpose to detecting


Many treasure hunters have confused waterproof and underwater metal probe. When they buy waterproof pinpoint and put the detecting stick into the water, who will happy to say OK the probe can underwater hunting but actually is just 2-3 inch deep in water.


Underwater seal technology is different form on land detectors, External push-button switch.


The probe ON/OFF button must be able to withstand water pressure, So it will not be pressed down under water over 1 meter depth.


Any connection parts will be water leakage, it should has perfect solution and the entire structure radical changes from the normal on land pinpoint detector.


Oil, acid, alkali, rot, gas will damage rubber seal, sealing will be affected rubber seal key core technology for metal probe can detecting in any bad condition


So far, the best metal detectors can detecting one coin deepest distance is less than 40cm / 15inch. We know that the bottom sea and lake is rugged, most groove deep over one meter / 3 feet, to treasure hunting with big normal underwater metal detector to use big coil to hunting is ridiculous dream to find gold and treasure. Please do not blind faith in the flat seabed can easy to find the gold coin, If there has one gold coin or nut which should has been pushed to the ditch by water already.


The best solution is use handheld underwater metal probe overall length is 200mm ( 7.8 inch ) diameter only 14mm ( 0.5 inch ) and even connect The Metal Probe with ABS telescopic handle (1-5 meters) to extend the detection distance for underwater treasure hunting, The probe not only detecting in deep hole but also protecting your for safety, who know what hidden dangers in the deep ditch when hunting in the wreck.


With big LED flashlight output bright distance 5-8 meters on-land and you can see clearly within 3-5 meters underwater and brightness can be adjusted.


Metal Probe must be small an easy to be Handling, so the size is small enough to be put into the small Rock hole and Metal probe detecting stick should less than dim. 1.5cm, it can be put into any small hole or beach or ground.


The probe should be very strong to force dig do not fear broken , So only One body shell can withstand under enormous pressure. It can be put into the sand and mud does not require any digging tools and can be used as leverage which can withstand 40 kg torque from the side and the positive impact over than 100 kg form tip or back


Constant tone over the targets is also key point to easy hunting
 
Top