Tesoro Cortes coil cable connection to pcb

[ivanpolakovic]

Hello,
Can somebody take a picture of the back of his-her pcb of tesoro cortes?
My dog teared apart my tesoro. Now i dont have connectors between the pcb and the coil.
I have the cable going from the coil, but before the box its cut.

I would like to solder the coil cables straight on the pcb, but dont know where which cable goes...

1. purple
2. grey

3. orange
4. blue

5. shield...

can somebody help me with a picture of the pcb back or somehow in a way of where to solder the cables straight on pcb?
Thank you guys a lot...

 

[ivanpolakovic]

please, could someone help mi with it? I would like to go on hunt today...

 

[tabman]

I haven't got one to take a picture of, but someone will come along shortly that does.

tabman

 

[ivanpolakovic]

Well, thanks anyhow... I will wait...

Ivan

 

[ivanpolakovic]

I couldnt find it anywhere on net... googling it already the second day and still nothing. Just have no other chance than asking somebody...

 

[stasys]

forum geotech1 dot com gogle it. all info there

 

[SkiWhiz]

The wiring on a Compadre which uses uMax type coils like on the Cortes is -

Pin 1 = Orange
Pin 2 = not used
Pin 3 = Purple
Pin 4 = Grey
Pin 5 = Ground/Shielding (center pin)

 

[ivanpolakovic]

Great. Thanks for the tip. Its helpful, but I would need mainly the connections from the back of the connector (as is numbered) to PCB (where it was originaly soldered...) But thanks, this also helps...

 

[ivanpolakovic]

The wiring on a Compadre which uses uMax type coils like on the Cortes is -

Pin 1 = Orange
Pin 2 = not used
Pin 3 = Purple
Pin 4 = Grey
Pin 5 = Ground/Shielding (center pin)

Pin 2 us supposed to be connected to blue wire? Where the blue wire is connected on a connector?