Hi all, I would like your thoughts on this coil. It is suppose to be a 5.75" concentric coil. I bought this on eBay brand new from an individual. It was $89.00 + shipping = pretty good deal. From all my research and going to different dealers websites I am unable to find a 5.75" concentric coil with a sticker on it like mine. They are all just plain black, the 5.75" widescan coils have a sticker on them. I am hoping that it is really a concentric coil. Now if the winter would go away so I can try out my new Vaquero. Thanks! Steve.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Tesoro coil info needed
- Thread starter SkiWhiz
- Start date
Hay Steve,
You're right. I sold the coil with my Cibola because I only had 10kHz machines.
I was hunting with D-2 and I wasn't finding anything so I turned my dicsrimination down
hopping to get more depth.
I dug a hole so deep I had to rest. D-2 came over to help but the target had come out
with my last shovel of dirt from the one foot pluss deep hole.
It was a small bit of a rusted nail. D-2 proceeded to lecture me on turning my disc too low.
I said " I told you this thing would go deep!! ".
We had a good laugh.
HH,
You're right. I sold the coil with my Cibola because I only had 10kHz machines.
I was hunting with D-2 and I wasn't finding anything so I turned my dicsrimination down
hopping to get more depth.
I dug a hole so deep I had to rest. D-2 came over to help but the target had come out
with my last shovel of dirt from the one foot pluss deep hole.
It was a small bit of a rusted nail. D-2 proceeded to lecture me on turning my disc too low.
I said " I told you this thing would go deep!! ".
We had a good laugh.
HH,
My coil doesn't look like that but I think it's an older model. I have a vaquero and that coil stays on it all the time. The weight is just right for that detector. I can't tell much difference in depth between it and the stock coil. It's great for getting between the brush and trash.
[quote kurt-ks]Thanks for reply tabdog. Was just curious,really don't want to be with out my Deleon 
for very long. Since it has preset gb do you think it would help to send it in for the 5.75? Seems to work just fine, just wondering--Kurt[/quote] I say if it isn't broke don't fix it. The DeLeon has manually adjustable ground balance in all metal mode. Steve.
for very long. Since it has preset gb do you think it would help to send it in for the 5.75? Seems to work just fine, just wondering--Kurt[/quote] I say if it isn't broke don't fix it. The DeLeon has manually adjustable ground balance in all metal mode. Steve.
I'm wondering about the re-tune part, also....
If a machine is optimized at the factory, when new, for their coil of choice, it would most likely go one size up, or down, using coils they sell for the machine. my situation is use of the CS coil. I do NOT get much depth with it, yet another user claimed he did very well.
I don't know if GB is same as a trimmer circuit for the coil.
Somewhere in the writings, someone said it was similar to a squelch control, which is NOT a trimmer function.
If your machine is adjusted to get optimal performance with a 5.75" coil, I don't see where it could function at it's best if the CS coil was swapped on to it.
But I'm no expert....
It would be great to hear from one, on this subject.
rmptr
If a machine is optimized at the factory, when new, for their coil of choice, it would most likely go one size up, or down, using coils they sell for the machine. my situation is use of the CS coil. I do NOT get much depth with it, yet another user claimed he did very well.
I don't know if GB is same as a trimmer circuit for the coil.
Somewhere in the writings, someone said it was similar to a squelch control, which is NOT a trimmer function.
If your machine is adjusted to get optimal performance with a 5.75" coil, I don't see where it could function at it's best if the CS coil was swapped on to it.
But I'm no expert....
It would be great to hear from one, on this subject.
rmptr
diggernash
New member
Hello all, first post. Y'all really should have locked the door sooner...
I have been a golden umax user for about 6 years. I have needed factory service once on the machine. When I sent it in, I didn't think to send my coils in with it. I received a friendly note in the return box that if I would like the machine/coil balance checked to please send my coil(s) in with the unit. Afterwards I got it confirmed that if you send your machine in with all your coils they will set it to work as good as possible with all coils. This may be a happy medium of all your coils. Hope this helps!
Jarrett "digger" nash
I have been a golden umax user for about 6 years. I have needed factory service once on the machine. When I sent it in, I didn't think to send my coils in with it. I received a friendly note in the return box that if I would like the machine/coil balance checked to please send my coil(s) in with the unit. Afterwards I got it confirmed that if you send your machine in with all your coils they will set it to work as good as possible with all coils. This may be a happy medium of all your coils. Hope this helps!
Jarrett "digger" nash