Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Teknetic's Add On Mods

KCK

New member
The Teknetics T2 and Garrett get Night Vision LED's and a Wireless Headset System, as well as High and Dry Stablizer Stands w/tool caddy.[attachment 20876 DCP_4708.jpg]

Both will show up really well at night, and the LED's are removable for checking those dark holes.
[attachment 20876 DCP_4708.jpg]

The Top Lights are easily added to your detector and mounts are included.
Everything else is simple PVC
 
Where do you find the colorful PVC? The curved pieces? The nifty rubber feet? Do you just saw a junction in half and glue it to the shaft? Any posts around here detailing plans for the "High and Dry" stand?

Thanks.
 
the curved 90 degree PVC elbows came from the electrical department, they are grey in color before being painted to match!approx. 1.99 ea They fit perfect into the Water PVC T's.
[attachment 21050 DCP_4703.jpg]

And you pretty much figured out the clip on part yourself brother....Just cut a slice out of the top of it like this...approx. 1/2 inch slice File down to perfect fit for easy snap on. If it's too hard to snap on just file a little more off till it's just the way you want it! T's are about .30 ea [attachment 21051 DCP_3971.jpg]

Paint to match or however you like it best...even a Two tone looks cool![attachment 21052 DCP_3968.jpg]

I had to file the center out a little to hold the light from Harbor Freight. 12.99 Bright 4-LED night vision light. Just file down enough from the inside of the T that you can twist the light in and it will hold, Twist the light out and use it to identify the find in the hole at night!
Even go dual if you wish too! Requires a 4-way PVC T
[attachment 21053 DCP_4709.jpg]

I hope this helps...if you have more questions email me at KCK@WOWWAY.COM or post your question on the forum. I pretty much read it every day![attachment 21057 DCP_4725.jpg]

The Little rubber tips are for a cane or crutch ...Hareware stores carry them also approx. .39

The entire PVC entertainment package is only about 6.00 max.
The most expensive is the LED lights Night Vision approx. 25.00 for the two light system. unless you get the LED's when they are on sale then 9.99 ea. Wait for sale and check out LED lights at Harbor Freight on line.
 
Top