Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Tejon Air Test (2 coils)
- Thread starter Hungarian
- Start date
With maximum sensitivity, the stock coil readings you have are about what I get in both all metal and discriminate mode with the discriminator set at iron. I do not get much more than the stock coil with the 12 x 10 in an air test ... maybe 1/2 inch more. I get about an inch more on a nickle than I do a quarter with all the coils I have as long as the discriminator is lower than mid-foil.
The 3x18 clean sweep is only about 1 to 1.5 inches less than the stock coil with similar settings in an air test.
If my 12 x 10 were that much hotter, I'd have to seriously consider using it more where it isn't too trashy to use it.
Cheers,
tvr
The 3x18 clean sweep is only about 1 to 1.5 inches less than the stock coil with similar settings in an air test.
If my 12 x 10 were that much hotter, I'd have to seriously consider using it more where it isn't too trashy to use it.
Cheers,
tvr
