pull tab mel
New member
Buying a t2 from a local dealer tomorrow. Would love to look at a video for instructions. I found one on the F75. Is it the same. There is one on utube but cant get it in english?
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
T2 Video
- Thread starter pull tab mel
- Start date
The Fisher machine is different .No problem with the T2 setting it up for searching. Press the menu button then turn the control knob to select the settings you want i.e. start with Sens 75 disc 10 sounds 2+ be careful not to knock the control knob when you are searching or you may loose your settings.This is the one downside of the machine. Also make sure that the batteries are tight on the springs as again when you put the machine down you will loose your settings and it will go back to default settings one of which is sounds 1 which gives you all metal .ON the other hand its the best machine for finding goodies that I have had over the past 30 years.When out searching take it slow over the ground don't rush also keep the coil as close to the ground as possible. I see many detectorists out on rally searches that appear to be trying to find low flying aircraft !and moving at such a speed that they Will only find large iron .As far as I know there is not an English video that you can understand there was one but the wind noise and the chaps dialects were incomprehensible.Any thing Else I can help with please ask.
Brian
Brian
johnnybegood
New member
I am going to work on a good video for the t2 and the t2se..
I feel i have learned alot of good tips and could help out with some questions on settings.
The only problem is its freakin freezin and im not going out in this weather.....
John
I feel i have learned alot of good tips and could help out with some questions on settings.
The only problem is its freakin freezin and im not going out in this weather.....
John
johnnybegood
New member
Hey Mel and everyone dont forget the T2 has its own site..
Look here in the tek files for some tips..
John
http://www.tekneticst2.com/tek-files.htm
Look here in the tek files for some tips..
John
http://www.tekneticst2.com/tek-files.htm