T2 Ltd control box question

[swarfy]

Just a quickie my new T2 arrived this morning and Im well pleased but noticed when putting the control box cover on that the handle is very rigid as should be but the control box isnt as rigid and moves quite easily is this normal ? looks like one large knock on the side and it will part company with the handle is it ok ?
mick

 

[Moonlightrick]

Just checked my control box Mick there is slight play in it but I wouldn't call it wobbly.
Dont know if this helps! Rick

 

[BuckeyeBrad]

Some "flex" is normal and frankly, if it isn't by design, I'm glad it's there. If you carefully pull the foam grip down from the top maybe about 3/8", you'll see a phillips head bolt that goes through the grip and mount lug of the the control box. Sometimes that can come loose a little bit at which point you can just snug it up.

 

[swarfy]

Thanks lads was just checking,
mick

 

[Trocar]

I just noticed your question on here. I had that same thing happen to mine after few months of use. I just folded down the foam grip at the top of the handle and tightened the screw at the top. It made a world of difference. Hope this helps!