T2 Control box loose, any ideas how to tighten?

[Pacman]

Hi All,
I have felt a slight wobble when swinging my machine and have identified that the control box under the arm rest has come loose.
I cant see any obvious simple bolts that I can tighten. So before I go trying to take everything apart, does anyone know of how to tighten it back up again.
Today I have also had some loss of sound from my head phones, not complete but now and again and very muffled and this appears to have something to do with the same loose item as they are the same unit.
Any suggestions would be appreciated before I look into sending off for repair, as to who it would go to, then that's another story? (UK based)
Rgds
Paul

 

[Ken in NC]

My T2 has one hex bolt showing on the front end of the bottom of the battery box. I would imagine that there is another bolt inside the battery box at the rear of the machine. You would have to remove the back cover of the battery box to find that rear hex bolt

Hope that is of some help

 

[Pacman]

Many thanks Ken, much appreciated.

I have had a little play about. The allen bolt was removed from underneath and the box slid off rearwards. The screw behind the battery cover does not do much as far as holding on the box goes.
There are a few wires in there as expected, so I slid it back on and refitted the bolt. I think by repositioning it slightly has fixed the problem and stopped the movement.
Just more annoying than anything.

Thanks again.

Regards

Paul