I was getting a callus on the palm of my hand, so I did some brainstorming. I used 1/2 inch PVC piping, caps and tees to make the T-Handle. I used Gorilla Glue to secure it into place. Use a liberal amount of glue and mist it well with water, so it well expand and hold everything securely in place. The metal handle needs to go into the cross T until it hits back of the cross T and at the same time touch the red handle grip. I cut my red handle grip back a tad too far, so I cut off a sliver off the end of the metal handle to make it work out correctly. When the glue dries, cut off of excess glue and sand smooth with sandpaper. Just make sure you use Gorilla Glue, because it expands.
tabman
tabman