Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Super Tune Question

Happy_Hour

New member
n/t
 
Super Tune Answer. :clapping:
 
Maybe you should ask a question. Maybe you'd get an answer.
 
This is a post that should go to the Tesoro forum, that topic has been beaten into the ground..... if you search the archives.
 
It depends on what his question is about super tuning. Some folk super tune the Beach Hunter ID but you're correct in that it's used widely on many of the Tesoro detectors.
 
1- turn on the BH & go through the normal set up (steps 2 through 4)
2- set sens to pre-set with mode switch in disc mode.
3- turn threshold control to faint threshold
4- set mode switch to all-metal mode& ground balance machine normally
5- after ground balancing & while still in the all-metal mode, turn the sen. to max. the threshold will change to a high shrill.
6- hit the reset to return to a normal threshold
7- Re ground balance. There will be a narrower window within which to balance at this time
8- leave the mode switch in all-metal mode & begin hunting. There will be a marked improvement in depth.
NOTE- there will no longer be tone identification between targets. However, the target identification lights will still be accurate.
 
Top