SunRay Headphones

[jeeptj]

I have a set of SunRay Gold headphones and for reason they don't work of my racers both models but they worked on my Etrac.

Any thoughts?

Thanks

 

[7centsworth]

You have to flip the switch. Some detectors are mono and some stereo.

 

[Tom Slick]

My SunRay Pro Golds work fine on my Racers

 

[jeeptj]

I have tried the switches. My rattlers headphones work. I guess there something wrong with the sun rays then.

 

[jeeptj]

Found the problem the plug is bad. Depending which way I move the wire it works.
Time for a new plug.

 

[Rick(ND)]

It is a bad wire at the pug as I have seen this on many different headphones over the years. I know there is a place to send them to be repaired, maybe someone can tell you were. These are made by the company that also makes Killer Bees I bees, but to different spec. I hear they are very reasonable and think they just replace the whole cord.

Rick

 

[Monte]

You might want to make a phone call or text message first to verify the information is current.

You can find Killer B Headphones under:
http://thrpro.com/

Mailing address for repair:
B&B Distributors LLC.
1106 Crabtree Rd.
Tuscaloosa, AL. 35405

E-Mail Contact:
johnsmith55@bellsouth.net

Phone or Text to:
205-239-6680


I used to use the Killer B 'Wasp' headphones full-time, and at times I had the virtually identical SunRay Pro Gold, also made by them. But I transitioned to the Killer B 'Hornet' which uses all the same components except a slightly large 'tank' style ear cup. I find them much more comfortable, less pinching on the ears [size=small](they are roomier)[/size], and they block more outside noise. The only other corded headphone I use are the White's Pro Star because they use the same size/type 'tank' style ear cup.

With my Racer 2 and Gold Racer models, 95% of the time I rely on Makro's very comfortable 2.4 Gig. wireless headphones. I use my corded headph0nes with my Nokta's and other detectors.

Monte

[size=small]PS: If you find out my contact information is incorrect, please post the corrected and current information.[/size]

 

[jeeptj]

Thanks I will look into it. They are great headphones.

 

[amberjack]

If you want to buy a new plug and install it the wiring is as follows;
white to the tip of the plug
red to the center
black to the section closest to the plastic.

AJ