I found a stand that works great on the Makro Racer. I purchased it on ebay from rods_by_plugger. He has an ebay store. It is actually for the Whites DFX, MXT, etc. but it fits the Makro Racer. I put a small hose clamp on the front and back just to keep the detector standing straight up and down. Without the clamp, it will turn a little sideways sometimes. It keeps the box about 4 1/2 inches off the ground. I tried to include a picture of my detector with the stand on it, but for some reason it did not work.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Stand for Makro Racer
- Thread starter JEF
- Start date
Low-Boy/LCPM
Active member
Nice..I have something like that and it really help the racer from rolling over..
Ytcoinshooter
Well-known member
Nice, I have two of those. Think I might try that. For now I've been running the covers and the unit likes to flop on its side. I'm real careful re the trigger switch. Unlike some detectors I would not drill a small hole through the detector rod to secure the stand with a screw. I'm sure the Racer has wires or ribbon cable running through the rod from the rear box to the display pod.
HH - Bruce
HH - Bruce