Speaker & Headphone on same time?

[CROCK of COINS]

At times I find that my Speaker & Headphone are on at the same time :-(

The speaker will go off (no sound) when I pull the trigger.

Is this a case of my batteries getting low? I am still on the original (headphone) batteries from Mar 19th.

I know I saw a headphone batt. setting, but don't remember how to get back to it?

Jerry

 

[ak_1234]

I would guess that is true.

To get to the battery status, expert menu/Information and then you will see the wireless headphone battery status.

 

[CROCK of COINS]

I would guess that is true.

To get to the battery status, expert menu/Information and then you will see the wireless headphone battery status.

Thank You..I found it as you did the reply ;-) =Last thing in "expert menu"

My voltage is: 2.25v

I understand if the headphone were to loose signal...that the speaker will go on! What I had was BOTH on at the same time for 10 to 20 seconds. I will take better note of how long next time out.

Jerry

 

[Carl-NC]

The WHP reports battery voltage back to V, and V uses that as an indicator as to whether WHPs are still active or not. It could be that you are on a noisy channel and the battery report is getting dropped often enough that V thinks that WHPs are off. So try switching to a different channel.

- Carl

 

[CROCK of COINS]

Thanks Carl, ak_1234 asked that I look at the signal bar next time to see if it is low.
I never lost headphone sound...just had speaker kick in for a few then the speaker would drop back out.

I will get back to the same beach and try it again.

TY

Jerry