The same happened today at a local beach in long beach ,california . I was scouting for areas not too crowed and seen a fellow detectorist swing a PI machine around a large cut. So much sand was gone i could not resist,so i broke out my trusty sovereign xs-2a pro with WOT coil.
As a courtesy, i detected well behind him working a walking grid pattern from cut to surf and back. Right off i was seeing him "ARC" his swing and KNEW he was leaving targets behind.
He was digging a few holes , but he noticed that i was digging targets at least 3 to 1. I turned to look at my areas of digs and continued working that zone of beach. He gave me the dirtiest look and said nothing to me as i stopped and decided to work far ahead of him.
Learning your machine is absolutely a must. I work iffy signals front and back ,90 degrees to found signal and wiggle.I know or i could feel that i was being watched ,but kept to myself.
NOTHING CLEANS A BEACH LIKE A SOVEREIGN even against minelab's own FBS detectors.
I run ALLMETAL and cross check with disc. (zero disc or lowest setting to work trash), with the WOT i am digging quarters at 15" plus and still can recover very small targets. I dug a small thin wire bracelet 2 feet from "his " dug hole.
I used to have that LAKER COLORED pi machine he was using but will never go back, My sovereign will never be sold .
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
