Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Some Field Tests From Garrett's More Popular Equipment::cam:

John-Edmonton

Moderator
Staff member
ACE 250 Field Test Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=LT20050614

GTI 1500 Field Test Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=lt19981222

GTI 2500 Field Test Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=lt19991110

GTP 1350 Field Test Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=LT20041144

Infinium Field Tests Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=lt20021136
or
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=LT20030826

Garrett XL Sea Hunter Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=lt19921130

Master hunter CX Plus Field test Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=LT20001136

Scorpion Gold Stinger Field Test Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=lt19910108

Gravity Trap Gold Panning Kit Test Click Below:
http://www.losttreasure.com/fieldtests/ArchiveView.cfm?ID=TF19940120

<center>Now if you read them all.......you must be tired!

<center>
 
Reading Andie's report about the sizing of the 1500, he indicated that aluminium screw caps lock in at C in the target sizing.I had heard previously heard that they bounce between B and C in the sizing. Which is correct? I assume that if they are crushed up a bit, then they would lock into B. Would that be correct?
On the 1350's do screw caps show up as small sized targets?
Mick Evans.
 
They do probably bounce around B-C area. It depends how they are positioned in the ground and if some of those tiny links are still attached to the cap. On all my Garretts, screwcaps ID a notch or two to the left of the penny icon, so I usually already know it is a screw-cap before I dig it. But....so do large cents, so I dig iffy signals anyway. I love surprises. :)
 
Top