Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Shout out to Nokta on the Relic

W

woodchiphustler

New member
Found targets on a very short hunt on a pounded Plantation site. The depth of the small coil is out standing with one large Wanker coat button at a measured ten inches.
 
Nice work!
I pick my FR up on Monday. Can't wait.
How did you set up your tone break settings? Did you have a chance to mess with the different settings much? Thanks!

Dean
 
Deep mode, 60 sensitivity, 39 tone break, iron volume 1. A ton of square nails so these settings worked well with the small coil.
 
I run the deep one today, just left on factory settings. with big coil. found a few small things. what im not sure of is the tone brake and id masking or I mask
 
I have found that when you break the tone at 39 most iron and modern trash will sound off with a low tone. All other non-ferrous signals sound off with a higher tone in relic mode.
 
woodchiphustler said:
I have found that when you break the tone at 39 most iron and modern trash will sound off with a low tone. All other non-ferrous signals sound off with a higher tone in relic mode.
Click to expand...
Going to try the tone brake at 39, how about the other two? leave at factor? It dont miss much in the deep mode.. I need to find some old home sites to hunt with it. Walking around in these old camps is hard to find much, have to walk three days to get over a good bullet or button. hard to learn a machine these days not digging like we use to .
 
Unless mineralization is a problem put the iMask setting at zero. I prefer to hear everything so I leave the ID Mask at 5 and the Iron Volume at 2 or 3. As for tone break : In DI3 you can only change the mid to high tone setting. I like it at 70 because IHPs/ wheaties will come in in the low 70s and I want those to be high tones. The copper buttons I dug yesterday came in in the 60s. In DI2 you can set the tone to break where ever you want there to be a low to high break. I left it at 20. But I think that will vary with the site and the type of trash there.

Dean
 
You must log in or register to reply here.
Top