Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Search Program for destroy electric interf

A

AQUARIUS

New member
Hello Guys , I m French and excuse me for my write ,

To France it s difficult to use V3 on the country because there are almost powerlines for the cow , and the V3 can t like that !!!

I practice with the coin and jewerly program , I use three frequencies , my sensibility is 88 , all metal 55 and I use the RX BOOST but if I use my V3 on this type of ground I can t use TX BOOST , I adapted my gain after pumping and use that the program say to me !

can you give me a good program with the modification for don t be interfere by powerline for cows !

thanks for your help !!!
 
If I am understanding you correct I think you are talking about an "Electric Fence" . If so, try "Frequency Offset" and see if that helps you out.
 
Besides the Frequency offset you can also try single frequency modes of operation. The electric fence transmits a lot of radio frequency noise, which I am guessing is causing your problems. There is probably one of the Frequencies of the V3 that is less susceptible to the electric fence. Or I suppose you could just keep some distance between you and the fence.
 
Hello and thanks

Yes It s "Electric Fence" my big problem !!!!!

the decal frequency ?? yes I use it but I put it at +3 but it s not good !!!

use one frequency ?? yes but the performance is nt good after , I prefer use three frequency if it is possible !

the distance , well if I detect to 50 meters to the Electric Fence I take her !!!!!!!!!!

I hate that but in France they are almost Electric fence , It s cool to detect to forest also !!!

thanks for your future help !!!
 
One thing I can say about the stock 10" dd coil on the V-3 Is lots of EMI. It is a EMI magnet. I think if you read more posts on this forum you will find lots of issues with this.
If you have the ability to try out a different coil say the 6x10 or the 4x6 you may find 1 to be a better choice for your problem.
I have quite a bit of EMI at my home because the powerlines are nearby so changing out to a smaller coil helped my problem along with frequency offset.
Correlate may even help some, can't hurt to try that too.
Good Luck and I wish I could be more help to you.
 
Thanks

I have the 6" x 10 " disc !

and sunday I detect with him and I have the problem with !

I see that this disc is many sensible by the DD10" , the DD10" is more sensible and take the electric interference is very easy for it !

Nothing have a specific program to protect the V3 by EMI ?

It s possible to get a personnel program on this forum ???

thanks
 
Go right ahead and post you program.
 
You must log in or register to reply here.
Top