Awhile ago, there was a thread here about what war nickels ID as on the F-75. I had said that they ID'd as high tones in the ground, but a little lower once you had them out of the ground. A few people replied, saying that their machines ID'd war nickels right around '31'. Well, I dug another one on Saturday, a 1944-D (35% silver, 56% copper, 9% manganese - source: coinfacts.com). It was about 7 inches deep, and registered as a high conductor in Delta Pitch mode (the ID was bouncing the high 60s to low 70s range). After I got it out of the ground, I remembered the old war nickel ID thread and said "AH, I've got to test this thing in a clean spot and see what it IDs!". So, a 1944-D (large mintmark on the back) war nickel IDs numerically as a '58-60' on my machine, when it is laying at the surface. I made sure the ground was clean around the target. It makes sense that a war nickel should ID higher than a 'nickel' nickel, because of the silver and copper content. Why it IDs considerably higher in the ground, I don't understand, but I have noticed this phenomena quite often with the F-75. I'm not complaining, because war nickels are desirable "silver" coins in my book, and I'd prefer that they sound like a silver coin! Reporting from the field......Jim