Reduce the sensivity

[Anonymous]

hello
Just comment that in the last exits I been using the sensivity in 16-18 and look like the detector goes more stable without falsing and pulling out more thinks.
I been passin through place that I went before Im recovering more staff than before
All at the begining we turn up the sensivity at maximun or in higher values than the Factory setting but it works better in lower values with great deep.
Just ask the opinion of the experts about this matter
Thanks in advance
Regards

 

[Anonymous]

I find I do better with manual sensitivity from 16-22 than auto at max. I proved it to a few too that in auto at max in trashier areas you lose depth and sometimes dont get much over 2 inches of depth, while the lower sensitivity and manual will do much better.
Rick

 

[Anonymous]

Is manual sensitivity acomplished
by going into advanced setting ?
Thanks in advance Dave

 

[Anonymous]

Dave,
Manual sensitivity is done by the center push pad on the left side of the screen, the top one is to go higher while the bottom to go lower while the center one is for turning the manual on and hit it again it is auto sensitivity. When you see the line going around the number it is in auto, when no line it is in manual.
In trashier areas the sensitivity in auto is trying to run smooth, but lose a lot of depth where as the manual sensitivity is staying where you set it and may not be as stable and you will hear more false signals, but seems to get better depth at lower settings.
Rick