David_lvdc
New member
Hello, a couple of weeks ago I bought a Makro Racer 2, I had a hard time deciding to read many forums and watching hundreds of videos.
Some options were Garrett Pro, Teknetics T2, Fisher F75. But finally I decided on the Makro, good depth, very good unmasking of the iron and current model of 2016.
But after several huntings with him I am very upset, I have tried a lot of configurations. The maximum depth for a normal sized coin is 4 "or 5". The mineralization of my groung is low, one or two bars. The ground balance is between 55 and 60. I use 2 tone mode to try to go deep between 70 and 80 gain, id mask 03 - 05.
In larger irons it can reach 10 or 12 inches, and the air test also looks like a normal depth with coins between 10 and 15 inches. I do not know if this is normal or I have a defective unit, because my Eurotek Pro with the 8 "concentric coil is deeper than the Racer 2 with the 7x11 DD.
Greetings and thanks for the help.
Some options were Garrett Pro, Teknetics T2, Fisher F75. But finally I decided on the Makro, good depth, very good unmasking of the iron and current model of 2016.
But after several huntings with him I am very upset, I have tried a lot of configurations. The maximum depth for a normal sized coin is 4 "or 5". The mineralization of my groung is low, one or two bars. The ground balance is between 55 and 60. I use 2 tone mode to try to go deep between 70 and 80 gain, id mask 03 - 05.
In larger irons it can reach 10 or 12 inches, and the air test also looks like a normal depth with coins between 10 and 15 inches. I do not know if this is normal or I have a defective unit, because my Eurotek Pro with the 8 "concentric coil is deeper than the Racer 2 with the 7x11 DD.
Greetings and thanks for the help.